Differences

This shows you the differences between two versions of the page.

--- 3dprinters [2018-09-06 19:46] – DavidW
+++ 3dprinters [2023-10-31 22:04] – river
@@ Line 1: / Line 1: @@
 ====== 3D Printers ======
-=== 3D RepRap ===
+=== Costs ===
-[[http://reprap.org/wiki/RepRap|3D RepRap]]\\
-Ownership: Matt Ellis\\
-RAMPS 1.2 board, the electronics board that controls the printing process.\\
-Location:in the store, \\
-Status: semi-working, (worked before, was damaged, needs rewiring)
-=== Maker Bot ===
+^Material^Members/funders^Non-members^
-Ownership: <del>long-term loan from</del>donated to the lab by Fib\\
+|1.75mm PLA|£0.30/m|£4/hour|
-Status: Currently not working, (worked before)\\
+|3.00/2.85mm PLA|£0.50/m|£4/hour|
-Extruder isn't working and the firmware on it is the wrong one. Needs loads of work.
-=== Original Prusa i3 MK 2 ===
+=== Original Prusa MK4 ===
-Ownership: David Weis\\
+Ownership: Miron Zadora\\
-Status: Work in progress.\\
+Status: Working\\
-See [[Prusa i3 MK 2]]
+Location: G14\\
+Filament: 1.75 mm
-=== Prusa Style ===
+=== Original Prusa Mini ===
-Ownership: unclear\\
+[[prusa_mini|Prusa Mini]]\\
-Work in progress. Needs firmware reloaded and motor connectors put onto the cables.
+Ownership: TBD\\
+Location: G14\\
+Filament: TBD
 === Ultimaker 2 ===
-Ownership: Hacklab. Bought December 2014. See [[ultimaker2|Ultimaker 2]].
+[[ultimaker2|Ultimaker 2]]\\
+Ownership: Hacklab. Bought December 2014.\\
+Filament: 3.00/2.85mm\\
+=== Voron 2.4r2 ===
+[[voron_2_4_r2|Voron 2.4 r2]]\\
+Ownership: Jacob Lewis\\
+Status: Being tuned, but works, message Jacob on Discord for help using\\
+Location: G14\\
+Filament: 1.75 mm\\
 ====== Approved filaments ======
-Most of these can be bought on amazon.
+Be careful as our printers use different diameter filament!
+Most of these can be bought on amazon.\\
 You can also try asking on the mailing list as some members may be willing to sell some of their own.
@@ Line 33: / Line 41: @@
   * [[https://rigid.ink/|Rigidink]]
   * [[https://hatchbox3d.com/|Hatchbox]]
-  * RS Pro
+  * [[https://uk.rs-online.com/web/c/computing-peripherals/3d-printing-scanning/3d-printing-materials/|RS Pro]]
   * [[https://amz3d.com/|AMZ3D]]
   * [[https://colorfabb.com/|ColorFab]]
@@ Line 40: / Line 48: @@
   * [[https://rigid.ink/|Rigidink]]
   * [[https://hatchbox3d.com/|Hatchbox]]
+====== Old 3D printers =====
+=== 3D RepRap ===
+[[http://reprap.org/wiki/RepRap|3D RepRap]]\\
+Ownership: Matt Ellis\\
+RAMPS 1.2 board, the electronics board that controls the printing process.\\
+Location:in the store, \\
+Status: semi-working, (worked before, was damaged, needs rewiring)
+=== Maker Bot ===
+Ownership: <del>long-term loan from</del>donated to the lab by Fib\\
+Status: Currently not working, (worked before)\\
+Extruder isn't working and the firmware on it is the wrong one. Needs loads of work.
+=== Prusa Style ===
+Ownership: unclear\\
+Work in progress. Needs firmware reloaded and motor connectors put onto the cables.