Differences

This shows you the differences between two versions of the page.

--- 3dprinters [2014-06-10 05:29] – jane
+++ 3dprinters [2024-02-06 19:25] (current) – Prusa mini is on holiday, updated page to reflect change jaso55555
@@ Line 1: / Line 1: @@
 ====== 3D Printers ======
-=== Maker Bot ===
+===== Costs =====
-Currently not working. Extruder isn't working and the firmware on it is the wrong one. Needs loads of work.
+^Material^Members/funders^Non-members^
+|1.75mm PLA|£0.30/m|£4/hour|
+|3.00/2.85mm PLA|£0.50/m|£4/hour|
-=== Prusa Style ===
+===== Working Printers =====
-Work in progress. Needs firmware reloaded and motor connectors put onto the cables.
+|{{:prusa_mk4_large.jpeg?direct&200|}} \\ **[[3dprinters:prusa_mk4|Original Prusa MK4]]** | **Owner:** Miron Zadora \\ **Filament:** 1.75 mm \\ **Location:** G14|
+|{{:prusa_mini_large.jpeg?direct&200|}} \\ **[[3dprinters:prusa_mini|Original Prusa Mini]]** | **Owner:** Miron Zadora \\ **Filament:** 1.75 mm \\ **Location:** On holiday|
+|{{:voron_large.jpeg?direct&200|}} \\ **[[voron_2_4_r2|Voron 2.4r2]]** | **Owner:** Jacob Lewis \\ **Filament:** 1.75 mm \\ **Location:** G14|
-=== 3D RepRap ===
-[[http://reprap.org/wiki/RepRap|3D RepRap]]
-RAMPS 1.2 board, the electronics board that controls the printing process.
-Location:in the store,
+===== Hibernating Printers =====
-Status: semi-working, (worked before, was damaged, needs rewiring)
 === Ultimaker 2 ===
+|{{:ultimaker2_large.jpeg?direct&200|}} \\ [[ultimaker2|Ultimaker 2]] | **Ownership:** Hacklab (Bought December 2014) \\ **Filament:** 3.00/2.85mm \\ **Location:** G11|
+====== Printer Graveyard =====
+=== 3D RepRap ===
+[[http://reprap.org/wiki/RepRap|3D RepRap]]\\
+Ownership: Matt Ellis\\
+RAMPS 1.2 board, the electronics board that controls the printing process.\\
+Location:in the store, \\
+Status: semi-working, (worked before, was damaged, needs rewiring)
+=== Maker Bot ===
+Ownership: <del>long-term loan from</del>donated to the lab by Fib\\
+Status: Currently not working, (worked before)\\
+Extruder isn't working and the firmware on it is the wrong one. Needs loads of work.
+=== Prusa Style ===
+Ownership: unclear\\
+Work in progress. Needs firmware reloaded and motor connectors put onto the cables.