3dscanner
This is an old revision of the document!
3D Scanner
We have a NextEngine 3D Scanner SD.
Software install
- Download ScanStudio CORE 1.7.3 from www.nextengine.com/start and save to computer. (local mirror: scanstudio_1.7.3.exe)
- Download the Desktop 3D scanner drivers from support.nextengine.com and go to the download section and install. (local mirror: usb_driver_installer.exe)
- After save is complete, right click in installer and go to Properties
- Then click on the Compatibility tab and check 'Run this program in compatibility mode for:“ and set it to Windows XP SP3 and press OK
- Now right click on the installer and select 'Run as administrator'
- Proceed to install and make sure that the 3D Scanner driver box is unchecked (if it is checked, then proceed and just ignore the errors that might pop up)
- ScanStudio will start with errors, but just close the software after it loads up
- Copy the attached DLL (wdapi901.dll) to the following directories:
- C:\Program Files(x86)\NextEngine\ScanStudio\Driver
- C:\Program Files(x86)\NextEngine\ScanStudio\DLL
- Run ScanStudio and plug in scanner
If installing on a 32-bit PC, please skip steps 7-9
3dscanner.1437687545.txt.gz · Last modified: 2015-10-05 15:55 (external edit)