bantam_lathe
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revision | Next revisionBoth sides next revision | ||
bantam_lathe [2019-05-08 23:01] – alfie | bantam_lathe [2019-05-15 13:48] – [Risk Assessment (WIP)] Adding point on being pushed by others vzickus | ||
---|---|---|---|
Line 32: | Line 32: | ||
| **User injury** | Contact with rotating parts and hot swarf can cause cuts, abrasions and burns. | Appropriate feeds and speeds should be selected to minimise stringy chips/" | | **User injury** | Contact with rotating parts and hot swarf can cause cuts, abrasions and burns. | Appropriate feeds and speeds should be selected to minimise stringy chips/" | ||
| **Entanglement** | Long hair, dangling jewellery, loose clothing or gloves can become entangled with rotating parts, dragging the user onto them. Application of cutting oil using a brush presents an entanglement risk. | Loose clothing should not be worn, or should be covered with an appropriately secured apron. Long hair is to be tied back. Loose jewellery should be removed. Gloves should not be worn when the machine is in operation. | | | **Entanglement** | Long hair, dangling jewellery, loose clothing or gloves can become entangled with rotating parts, dragging the user onto them. Application of cutting oil using a brush presents an entanglement risk. | Loose clothing should not be worn, or should be covered with an appropriately secured apron. Long hair is to be tied back. Loose jewellery should be removed. Gloves should not be worn when the machine is in operation. | | ||
+ | | **Lack of space/ | ||
| **Slips and trips** | Spilled cutting oil can make the area around the machine slippery | | | | **Slips and trips** | Spilled cutting oil can make the area around the machine slippery | | | ||
| **Electrical hazards** | | | | | **Electrical hazards** | | | | ||
Line 41: | Line 42: | ||
* Entanglement with the spindle, chuck, workpiece or feed mechanism. | * Entanglement with the spindle, chuck, workpiece or feed mechanism. | ||
+ | * Being pushed in by other users due to lack of space. | ||
* Unsecured spinning things flying off - chuck key, loose work, things falling from the headstock onto the chuck. | * Unsecured spinning things flying off - chuck key, loose work, things falling from the headstock onto the chuck. | ||
* Sharp/hot metal chips. | * Sharp/hot metal chips. |
bantam_lathe.txt · Last modified: 2023-07-05 19:46 by mike