Differences

This shows you the differences between two versions of the page.

--- bantam_lathe_training [2017-01-27 14:08] – mike
+++ bantam_lathe_training [2021-10-14 14:22] – costa
@@ Line 1: / Line 1: @@
 Hazards
+  ====== Checklist ======
   * Entanglement with the spindle, chuck, workpiece or feed mechanism.
+Don't wear jewelry, loose clothing or long hair when operating the lathe.
+Don't use sanding paper or hand sanding while operating the machine.
   * Unsecured spinning things flying off - chuck key, loose work, things falling from the headstock onto the chuck.
+Wear protective goggles when working with the lathe.
+Never leave the chuck key in the chuck and make sure that the workpiece is securely tightened and nothing obstructs the rotation.
+Don't stand at the potential danger zone, position yourself closer to the tailstock.
+For emergency stop hit the E-Stop button and or foot pedal.
   * Sharp/hot metal chips.
+Use correct feedrates, depth of cut and spindle speed recommended for the cutter, material and the diameter of your workpiece. Don't exceed those.
   * Entanglement in the belts/gearing behind the cover.
   * Collisions between chuck/workpiece & toolholder/cross-slide/tool.
@@ Line 15: / Line 25: @@
   * Misconfiguration of VFD.
   * Oil or items on the floor causing slipping/tripping.
+  * Burns - Hot tools / workpiece
+  * Fire - hot oil / work / use of solvents (e.g. for marking) / machining plastics
+  * Fumes - melting plastic workpieces
+  * Oil spray - e.g. getting in eyes
+  * Electric shock (if cables are damaged)
+  * Lone working / how to get help