Differences

This shows you the differences between two versions of the page.

--- g14_setup [2019-07-09 19:00] – [Tasks] Simon
+++ g14_setup [2019-07-26 11:35] – [Tasks] mike
@@ Line 9: / Line 9: @@
   * Install UniFi access point
   * <del>Order new legs for sink unit</del>
+  * Fit benches
+    * <del>Straighten the wavy worktop</del>
+    * Attach wooden battens to the wall to support the back of the worktops
+    * Notch out the corner of one worktop to fit the wall
+    * Chamfer/roundover the worktop edges(?)
+    * Sand & oil the worktops
+      * Coat 1
+      * Coat 2
+      * Coat 3
+    * Attach legs and fit the worktops, attaching them to the battens with L brackets - slotted so they can move up and down a bit(?)
@@ Line 22: / Line 32: @@
 ESD flooring has been proposed but is likely to be expensive. We have a roll of ESD flooring but it is soft (anti-fatigue, designed for standing workstations) and will be easily torn by chairs.
+The sink cabinet can support its own (empty) weight if the legs are raised.
 ===== Networking =====
@@ Line 43: / Line 55: @@
 [[https://www.ebay.co.uk/itm/Beech-Worktops-SALE-Farmhouse-Kitchen-Solid-Wood-Worktop-EU-Made/321370697566|Solid beech worktop 300x62x4cm]] £108 x2
-==== Plywood ====
+==== Storage ====
+On the short (far) wall:
+  * pick bins below the conduit
+  * component drawers above the conduit (up to 7 units can fit across the width of the wall).
+  * normal shelves above the component drawers
+Above the conduit over the workbenches we will fit twinslot shelf rails:
+  * 15-30cm shelves above the conduit for oscilloscopes, soldering gear, etc.
+  * louvre panels above for other tools and easy-access pick bins.
+  * normal shelves above the panels.
-Alfie to add pricing...
+[[http://www.raacostorage.co.uk/raaco-1200-series-small-parts-storage-cabinet-1260-00-137386-c2x14054698|Raaco 1200]] - £42 each.\\
+[[http://www.raacostorage.co.uk/raaco-bin-wall-panel-c2x14057787|Raaco louvre panel]] - £12 each.\\
+Two Raaco panels with bins - £72-£83.