Differences

This shows you the differences between two versions of the page.

--- lдsзя_cцttэя [2017-03-29 22:54] – [Basic plan] costa
+++ lдsзя_cцttэя [2020-07-24 19:16] – old revision restored (2016-11-23 13:41) alfie
@@ Line 1: / Line 1: @@
-====== Costa's crazy LASER CUTTER project ======
+====== Costa's crazy LДSЗЯ CЦTTЭЯ project ======
 ===== Basic plan =====
-Building budget laser cutter based on H-bot mechanics suitable for 1.2m long laser tube.
-Either 900x600mm: {{:900x600mm.png?200|}}
-or 900x900mm: {{:900x900mm.png?200|}}
-  -  Draw a bill of material, software, suppliers, people involved.
-New workshop activities:
-  -  Design in TinkerCAD - (50% done)
-  -  3D print parts
-  -  Source parts from BOM, find suitable piece of ply or HPL panel - 1300x1300mm (for 900x900mm cutting envelope) or 1300x1000mm (900x600mm cutting envelope) etc.
-  -  Assemble the mechanics and test it with a laser pointer.
-  -  Build the enclosure and safety switches
-G2 workshop activities:
-  -  Install CO2 laser tube
-  -  Connect extraction and watercooling to the cutter
-  -  Profit
-Some updates:
-It seems to me that we need to make a laser with 90x65x3cm working envelope. It will let us to use standard 4x8ft sheets cut into 6 parts (813x610mm).
-The Design/CAM software generating the G-codes is - https://github.com/LaserWeb/LaserWeb3
-The controller will be RAMPS 1.4 to begin with
-{{:2016-11-25_14-46-30.png?200|}}
-It turns out that it will be a minimum of 127x83x16cm dimensions (our current one is 125x75x25cm)
-Check out my super sneaky slant lasertube!
-Progress
-{{:2017-03-29_21-39-09.jpg?400|}}
+Costa to insert...
 ===== Pledges =====
   * Costa £100
   * Al £50
-  * Bernie £100
-  * ww £100