Differences

This shows you the differences between two versions of the page.

--- laserchimney [2019-07-06 15:08] – [Monday 6th July] tim
+++ laserchimney [2019-07-06 21:26] – [Monday 6th July] PeterJ
@@ Line 14: / Line 14: @@
 </del>
   * Drill-out duct brackets to accept M8 bolts
-  * Install new mains flex on fan
+  * <del>Install new mains flex on fan</del>
 Screwfix order (in progress):
-  * Spare square screwdriver bits for self-drilling duct screws
+^ Item ^ Quantity ^
-  * M8 wall anchors long and short (to be selected)
+| [[https://www.screwfix.com/p/easyfix-sleeve-anchor-10-x-75mm-m8-10-pack/16027|M8 75mm sleeve anchors 10-pack]] | 4 |
-  * Drill bits for anchors
+| [[https://www.screwfix.com/p/easyfix-steel-large-flat-washers-m8-x-2mm-100-pack/758ft|M8 oversize washers]] | 1 |
-  * Replacement 12mm drill bit for Al (broken on previous install)
+| [[https://www.screwfix.com/p/erbauer-impact-screwdriver-bits-sq-2-x-25mm-pack-of-3/12551|SQ#2 bits 3-pack]] | 1 |
-  * Sealant for duct joins (if there are any that don't use the pre-sealed couplers)
+| [[https://www.screwfix.com/p/sds-plus-shank-masonry-drill-bit-10-x-210mm/9054v|10mm x ~200mm SDS drill]] | 3 |
-  * Spare jubilee clips for fan/flex/duct interface
+| [[https://www.screwfix.com/p/sds-plus-shank-masonry-drill-bit-12-x-210mm/2687v|12mm x ~200mm SDS drill]] (replacement owed to Al) | 1 |
+| Jubilee clips for fan/flex/duct interface | 2 |
-===== Status =====
-Next task: Install the blower mounting bracket. We have the bracket and wall anchors. We need to arrange access to a larger ladder, borrow Al's SDS drill and do it.
 ===== Roadmap =====