Differences

This shows you the differences between two versions of the page.

--- laserchimney [2019-07-06 17:50] – [Monday 6th July] tim
+++ laserchimney [2019-07-09 23:41] – [DuctStore.co.uk] PeterJ
@@ Line 5: / Line 5: @@
 We are in the process of installing a duct to take the fumes to roof level.
-===== Monday 6th July =====
+===== Status =====
-Duct will be installed on Monday by Edinburgh Rope Access.
+The fan and ducting has been installed.
-Todo:
+To-do:
-  * <del>Fit anti-vibration mounts to fan bracket and adjust to correct positions.
+  * Order and fit flexible hose and internal ducting.
-</del>
-  * Drill-out duct brackets to accept M8 bolts
-  * <del>Install new mains flex on fan</del>
-Screwfix order (in progress):
+Items needed:
-^ Item ^ Quantity ^
+  * 200mm flexible duct from fan to G2 window.
-| [[https://www.screwfix.com/p/easyfix-sleeve-anchor-10-x-100mm-m8-10-pack/19292|M8 100mm sleeve anchors 10-pack]] | 4 |
+  * window entry flange(s)
-| [[https://www.screwfix.com/p/easyfix-sleeve-anchor-8-x-65mm-m8-10-pack/13190|M8 65mm sleeve anchors 8-pack ]] | 2 |
+  * filters to reduce the cleaning required for the fan
-| [[https://www.screwfix.com/p/easyfix-steel-large-flat-washers-m8-x-2mm-100-pack/758ft|M8 oversize washers]] | 1 |
+  * one-way valve to prevent incoming airflow
-| [[https://www.screwfix.com/p/erbauer-impact-screwdriver-bits-sq-2-x-25mm-pack-of-3/12551|SQ#2 bits 3-pack]] | 1 |
+  * splitter to supply both laser cutters
-| 10mm x 150mm SDS drill | 3 |
-| 12mm x 150mm SDS drill (replacement owed to Al) | 1 |
-| Jubilee clips for fan/flex/duct interface | 2 |
-===== Roadmap =====
-  * <del>Install the bracket that will support the blower. The bracket will be mounted on the outside wall, above the window between G1 and G2. This will probably require the borrowing of a larger ladder.</del>
-  * Install the blower on the bracket.
-  * Order flexible duct and internal fittings to bring the extraction into G2.
-When the blower is in place, we can begin the following:
-  * Order the vertical ducts and accessories to reach roof level (these will be too large to store so should be bought when we are ready to use them).
-    * Then arrange with Marcus to install them with the cherry picker.
-  * Install wiring to power the blower.
 ===== Shopping list =====
@@ Line 44: / Line 26: @@
 ^ Code ^ Description ^ Quantity ^ Line Cost ^
-| [[http://www.ductstore.co.uk/acatalog/Spiral-Tube-Duct-3m-Lengths.html#aSR|SR]] (200mm) | Spiral Tube - 3m Lengths | 4 | 129.74 |
+| TSVL200-100 | 200 dia 45° T Piece with Seals - 100mm Branch | 1 | 15.00 |
-| [[http://www.ductstore.co.uk/acatalog/Male-Couplers-with-Seals.html#aNPL200|NPL200]] | 200mm Male Couplers with Seals | 4 | 12.77 |
+| ILS200      | 200mm dia Flanged Spigot with Seal            | 2 | 5.12 |
-| [[http://www.ductstore.co.uk/acatalog/Jet_Cowls.html#aHAN200|HAN200]] | 200mm dia Jet Cowl | 1 | 82.30 |
+| DAOSL-200   | 200 dia Non-return Damper with Seals          | 1 | 11.06|
-| [[http://www.ductstore.co.uk/acatalog/Screws.html#aVDK-200|VDK-200]] | 200 Self-Drilling Screws + Drill Adapter | 1 | 7.08 |
+| RPCL200-150 | 200mm - 150mm Reducer with Seals              | 1 | 7.18 |
-| [[http://www.ductstore.co.uk/acatalog/Wall_Supports.html#aVWBS|VWBS]] (200mm, 50mm) | Wall Supports - Vertical Ducts | 8 | 129.02 |
+| MF          | 200mm Female Couplers                         | 4 | 7.80 |
+| HC135	       | Hose Clip Size/Diameter: 60-135mm            | 1 | 0.91 |
-Total: £360.91 inc VAT (free delivery over £200)
+|HC170	| Hose Clip - Size/Diameter: 60-170mm                 | 1 | 0.94 |
+| HC215	| Hose Clip - Size/Diameter: 60-215mm                 | 3 |3.63|
-Other
-  * <del>Wall anchors (sleeve or resin) for fan</del>
-  * Wall anchors (sleeve or resin) for duct
-  * <del>Unistrut hex socket</del>
-  * 200mm flexible duct
-  * Fittings for entry and internal duct