Differences

This shows you the differences between two versions of the page.

--- lasercutter2 [2019-07-21 21:59] – [Nozzle moves but doesn't cut] mirza
+++ lasercutter2 [2019-07-23 22:32] – [To Do] mirza
@@ Line 61: / Line 61: @@
   * <del>Clean laser tube water channels</del>
   * <del>Test optical power output and calibrate to a sensible maximum (e.g. 66% of peak rating)</del>
-  * Create chart of power/speed settings for common materials (as a basic rule, multiply speeds from the old chart by 3x)
+  * <del>Create chart of power/speed settings for common materials (as a basic rule, multiply speeds from the old chart by 3x)</del>
-    * Ply ✔
-    * MDF ✘
-    * Acrylic ✘
   * <del>Documentation for existing laser cutter users</del>
   * Update docs:
@@ Line 78: / Line 75: @@
   * <del>Fit extraction duct mountings on right-hand access door (order delayed, re-sent 10th April)
 </del>
-  * Create spare focus jigs (requires 12mm acrylic, or a new design)
+  * <del>Create spare focus jigs (requires 12mm acrylic, or a new design)</del>
   * Build and install monitoring system (laser usage, temperature logging)
   * <del>Fully check and adjust alignment</del>
@@ Line 91: / Line 88: @@
   * <del>Upgrade cutter-to-blower duct to PU or semi-flexible aluminium 150mm. **ACTION: MIKE**
 </del>
-  * Install ducts to roof and upgrade blower, to avoid releasing fumes onto courtyard users. **ACTION: PETE**
+  * <del>Install ducts to roof and upgrade blower, to avoid releasing fumes onto courtyard users.</del> **ACTION: PETE**
   * <del>Install LED lighting. **ACTION: ALFIE**</del>
   * Replace broken acrylic cover on front-loading slot.