lasercutter_training
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
lasercutter_training [2015-06-22 14:47] – A few amends al | lasercutter_training [2015-10-05 15:55] (current) – external edit 127.0.0.1 | ||
---|---|---|---|
Line 12: | Line 12: | ||
Objectives for basic use: | Objectives for basic use: | ||
- | * awareness of laser and voltage risks, and which parts of the cutter should | + | * Awareness that the laser can cause burns and blindness, that the laser compartment must remain |
- | * powering-up and checking that the cooling and extraction | + | * Awareness that the laser cutter contains high voltages (2kV, 240V) and that users must keep clear of the wiring in the laser compartment and control panel. |
- | * know which materials may be cut safely | + | * Know how to power-up the cutter |
- | * the importance | + | * Know which materials may be cut safely, that some plastics may produce chlorine or cyanide gases, |
- | * checking | + | * Know that there is risk of fire with *any* material and that the cutter |
- | * vertical alignment | + | * Know that the cutter works best with coolant temperature |
+ | * Basic use of the software. | ||
+ | * setting appropriate power/ | ||
+ | * using the cutter' | ||
+ | * positioning the workpiece and setting Z (vertical) alignment | ||
+ | * using the test button before cutting | ||
Objectives for basic maintenance: | Objectives for basic maintenance: | ||
Line 32: | Line 37: | ||
* full alignment | * full alignment | ||
* replacement of laser tube | * replacement of laser tube | ||
- |
lasercutter_training.1434984439.txt.gz · Last modified: 2015-10-05 15:55 (external edit)