Both sides previous revisionPrevious revisionNext revision | Previous revisionNext revisionBoth sides next revision |
mqtt [2018-10-06 16:55] – tim | mqtt [2019-05-08 21:49] – [Lighting] alfie |
---|
| environment/g1/extractor | 0=off, 1=on | Note that the radio link for this is patchy so may not work immediately. Do not send multiple events to compensate as this should be done by the driver script instead. | | | environment/g1/extractor | 0=off, 1=on | Note that the radio link for this is patchy so may not work immediately. Do not send multiple events to compensate as this should be done by the driver script instead. | |
| environment/g1/heating | 0-30, off | Send a numeric value to set a target temperature for G1, off to turn the heating off | | | environment/g1/heating | 0-30, off | Send a numeric value to set a target temperature for G1, off to turn the heating off | |
| | environment/g8/extractor/relay/0 | 0=off, 1=on | Wall extractor in workshop | |
| |
===== Lighting ===== | ===== Lighting ===== |
^ Topic ^ Payload ^ Notes ^ | ^ Topic ^ Payload ^ Notes ^ |
| dali/g1/preset/<preset> | (none) | preset=off/dim/bright/corners/movie/comfort/presentation/harmony/random or preset=<number> | | | dali/g1/preset/<preset> | (none) | preset=off/dim/bright/corners/movie/comfort/presentation/harmony/random or preset=<number> | |
| dali/g1/set/<light-id> | 0-254 | light-id=0-17 or light-id=all | | | dali/g1/set/<light-id> | 0-254 | light-id=0-17, light-id=all, or light-id=social (just the end of the room with the kitchen) | |
| dali/g1/script | json-formatted script | | | | dali/g1/script | json-formatted script | <code>[["set", 5,0], ["delay",2000], ["set_all",254]]</code> will set light number 5 to zero, wait for 2 seconds, then set everything to 254| |
| |
^ Topic ^ Payload ^ Notes ^ | ^ Topic ^ Payload ^ Notes ^ |
| |
^ Topic ^ Payload ^ Notes ^ | ^ Topic ^ Payload ^ Notes ^ |
| display/rhapsody/submessage | {"id": "<uniq-ref>", "message": "text..."} | Optional attributes: colour: red/yellow/green, priority: 1-100 (low values will be shown first, default=10). Max length 169 chars, 170+ crashes the script. | | | display/rhapsody/submessage | {"id": "<uniq-ref>", "message": "text..."} | Optional attributes: colour: red/yellow/green/multi, priority: 1-100 (low values will be shown first, default=10). Max length 169 chars, 170+ crashes the script (length limit is lower for multi-colour). | |
| display/rhapsody/raw | raw data | Send raw messages to Rhapsody display (not recommended) | | | display/rhapsody/raw | raw data | Send raw messages to Rhapsody display (not recommended) | |
| display/rhapsody/reset | | Reset the Rhapsody display (only required if the display is corrupted) | | | display/rhapsody/reset | | Reset the Rhapsody display (only required if the display is corrupted) | |
| display/doorbot/buttons/green/state | up, down | Sent by device, do not write | | | display/doorbot/buttons/green/state | up, down | Sent by device, do not write | |
| |
G1 LED strip: | G1 LED strip (the one that goes around the edge of the room): |
| |
^ Topic ^ Payload ^ Notes ^ | ^ Topic ^ Payload ^ Notes ^ |
| |
The LEDs can also be addressed in real time via a UDP network protocol. See [[https://gist.github.com/timhawes/910ee6b5bf9c36833235b0e075f01cbf|this example]]. | The LEDs can also be addressed in real time via a UDP network protocol. See [[https://gist.github.com/timhawes/910ee6b5bf9c36833235b0e075f01cbf|this example]]. |
| |
| G1 LED String, that goes across the ceiling in the middle of the room: |
| |
| This is not on mqtt yet, but can be controlled with a web interface at http://ceilingleds.hacklab. |
| |
G1 Warning Turret: | G1 Warning Turret: |
| |
^ Topic ^ Payload ^ Notes ^ | ^ Topic ^ Payload ^ Notes ^ |
| display/nec/brightness | [0-100] | changes the brightness of the display to //n// percent | | | <del>display/nec/brightness</del> | <del>[0-100]</del> | <del>changes the brightness of the display to //n// percent</del> | |
| | CURRENTLY BORKED ||| |
| Shorekarn scrolling display (in G1 window) |
| |
| ^ Topic ^ Payload ^ Notes ^ |
| | <del>display/shorekarn/message</del> | <del>text</del> | | |
| | Not currently set up ||| |
| |
| New Window display |
| ^ Topic ^ Payload ^ Notes ^ |
| | display/g1/windowled/text | text | seems to slow down render with large text| |
| | display/g1/windowled/colour | r,g,b | comma separated string of red, green, and blue (0-255) Takes effect on next text change | |
| |
| G1 Projector |
| ^ Topic ^ Payload ^ Notes ^ |
| | display/g1/projector/on | empty | Turns on projector | |
| | display/g1/projector/off | empty | Turns off projector | |
| | display/g1/projector/channel | text | Changes channel of radio to one of hdmi, vga, or svideo | |
| |
===== Access Control ===== | ===== Access Control ===== |
| sound/kill | empty message | Kills all queued and/or playing sounds | | | sound/kill | empty message | Kills all queued and/or playing sounds | |
| <del>sound/voice/change</del> | <del>voice name</del> | <del>Changes the voice to the one specified</del> | | | <del>sound/voice/change</del> | <del>voice name</del> | <del>Changes the voice to the one specified</del> | |
| | sound/time-out | seconds | Kill all playing sounds and remain silent for N seconds | |
| |
Replace [room] with one of g1, g2, g8, g11, or all. Room names can also be combined. e.g. "g1-g2-g8" | Replace [room] with one of g1, g2, g8, g11, or all. Room names can also be combined. e.g. "g1-g2-g8" |
| |
Sound effects get annoying **fast**. Don't say we didn't warn you. | Sound effects get annoying **fast**. Don't say we didn't warn you. |
| |
| ===== MQTT -> IR ===== |
| |
| Cazagen recently add a toy wiimote to G1 that allows for MQTT -> IR. |
| |
| It has the following commands. |
| |
| ^ Topic ^ Payload ^ Notes ^ |
| | ir/g1/amp/channel | pi, hdmi, mordred, table, laserdisc | Changes channel on amp to the chosen payload | |
| | ir/g1/amp | volumeup, volumedown, mute, poweron, poweroff, powertoggle | Transmits the obvious command | |
| | ir/g1/laserdisc | poweron, poweroff, powertoggle | |
| | ir/g1/raw | | not implemented | |
| | ir/g1/globalcache | | not implemented | |
| | ir/g1/... | | not implemented | |
| |
===== JeeNode Radios ===== | ===== JeeNode Radios ===== |
===== TODO ===== | ===== TODO ===== |
| |
* Network devices | <del> * Network devices</del>\\ |
* Door and window status | <del> * Door and window status</del>\\ |
* Shorekarn scrolling LED sign | <del> * Shorekarn scrolling LED sign</del>\\ |
* IRC bot | <del> * IRC bot</del>\\ |
| |