Differences

This shows you the differences between two versions of the page.

--- mqtt [2022-05-27 21:29] – river
+++ mqtt [2023-01-11 00:25] – [G1 Amp] cazagen
@@ Line 20: / Line 20: @@
 ===== Devices =====
-[[mqtt_devices|MQTT Smart devices login/Documentation]]
+[[private:mqtt_devices|MQTT Smart devices login/Documentation]]
 ===== Sensors =====
@@ Line 197: / Line 197: @@
 | display/g1/projector/off | empty | Turns off projector |
 | display/g1/projector/channel | text | Changes channel of radio to one of hdmi, vga, or svideo |
+==== Chart ====
+The blinky chart of the West of Scotland in G1.
+Note: Lighting mode may be overriden by hardware nya nya switch.
+^ Topic ^ Payload ^ Notes ^
+| display/chart/mode | rainbow, normal | Engage nya nya rainbow mode, or normal light colours / patterns. |
 ===== Access Control =====
@@ Line 307: / Line 317: @@
 There are 50 pixels on our tree, so 50 RGB values should be sent in each frame.
+===== G1 Amp =====
+^ Topic ^ Payload ^ Notes ^
+| sound/g1/amp/channel | channel_name | channel name, all caps e.g. HDMI1. Some macros are stored such as "pi" |
+| sound/g1/amp/power | on/off | |
+| sound/g1/amp/volume | up/down | currently this fades up/down the volume by 5dBm, this could be made to set the volume to a specific number, but that could go wrong... |
 ===== Misc =====