Differences

This shows you the differences between two versions of the page.

--- mqtt [2019-11-14 20:16] – cazagen
+++ mqtt [2020-02-10 21:03] – [Environment] cazagen
@@ Line 91: / Line 91: @@
 | environment/g1/heating | 0-30, off | Send a numeric value to set a target temperature for G1, off to turn the heating off |
 | environment/g8/extractor/relay/0 | 0=off, 1=on | Wall extractor in workshop |
+| environment/g14/heating/relay/0/set | 0=off, 1=on | Wall heater in G14
 ===== Lighting =====
@@ Line 149: / Line 149: @@
 The one that goes across the ceiling in the middle of the room.
-This is not on mqtt yet, but can be controlled with a web interface at http://ceilingleds.hacklab.
+These are running the WLED firmware, which is ridiculously comprehensive and can talk to basically everything.
+There is a web interface at http://ceilingleds.hacklab.
+Full MQTT docs at https://github.com/Aircoookie/WLED/wiki/MQTT
+^ Topic ^ Payload ^ Notes ^
+| display/wled/g1/0 | 0-255, "ON", "OFF", or "T" |  "T" means toggle |
+| display/wled/g1/0/col | #RRGGBB | |
 ==== G1 Warning Turret ====