Differences

This shows you the differences between two versions of the page.

--- pcbetching [2015-01-17 19:56] – [Equipment] miek
+++ pcbetching [2015-10-23 23:58] – [Equipment] switch from onecall link miek
@@ Line 7: / Line 7: @@
   * [[http://www.megauk.com/chemical-applicators.php|SN110 Developer Applicator]]
   * [[http://www.megauk.com/pcb_processing_tanks.php|PA104 Bubble etch tank]]
-  * [[http://onecall.farnell.com/mega/3204959/pcb-fr4-100x160-ds-photoresist/dp/3204959|Photoresist-coated PCB laminates]]
+  * [[http://uk.farnell.com/mega/3204959/pcb-fr4-100x160-ds-photoresist/dp/3204959|Photoresist-coated PCB laminates]]
 ===== Exposure ====
@@ Line 15: / Line 15: @@
 Place the printed design toner side up in the UV exposure box, peel off the protective cover from the PCB laminate and place it copper side down over your design.
-Close the box and expose for ~8 minutes. After exposure the design should be visible on the PCB but can be very hard to see.
+Close the box and expose for ~10 minutes. After exposure the design should be visible on the PCB but can be very hard to see.
 ==== Developing ====