plasticrecycling
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revisionLast revisionBoth sides next revision | ||
plasticrecycling [2022-06-01 00:05] – MirZa | plasticrecycling [2022-06-01 00:16] – [Extruding and Spooling] MirZa | ||
---|---|---|---|
Line 38: | Line 38: | ||
^ Material ^ Temperature (*C) ^ Mode ^ Screw \\ RPM ^ Motor \\ Current (A) ^ Drying \\ Needed ^ Notes ^ | ^ Material ^ Temperature (*C) ^ Mode ^ Screw \\ RPM ^ Motor \\ Current (A) ^ Drying \\ Needed ^ Notes ^ | ||
- | | PLA | 185-220 \\ depending on formulation | Soft | 7 | 0.7 | yes | | | + | | PLA | 185-220 \\ depending on formulation | Soft/Hard | 7 | 0.7 | yes | | |
| PETG | 210 | Medium | 7 | 0.7 | yes | | | | PETG | 210 | Medium | 7 | 0.7 | yes | | | ||
- | | ABS | 210 | Hard | 9 | 0.6 | yes | Safety ((The styrene fumes it gives off when melting are very smelly and can give you a headache, use extraction. Do your research and follow the safety recommendations)) | | + | | ABS | 210 | Soft/Hard | 9 | 0.6 | yes | Safety ((The styrene fumes it gives off when melting are very smelly and can give you a headache, use extraction. Do your research and follow the safety recommendations)) | |
- | | Nylon | 240 | _ | 9 | 0.7 | yes | | | + | | Nylon | 240 | Hard | 9 | 0.7 | yes | | |
| HDPE | 200 | _ | 9 | 0.6 | no | | | | HDPE | 200 | _ | 9 | 0.6 | no | | | ||
- | | HIPS | 200 | _ | 9 | 0.7 | no | | | + | | HIPS | 200 | Soft | 9 | 0.7 | no | | |
+ | | TPU | _ | Medium | _ | _ | _ | | | ||
| PP | _ | _ | _ | _ | _ | | | | PP | _ | _ | _ | _ | _ | | | ||
| PET from bottles | up to 270? | _ | _ | _ | _ |[[https:// | | PET from bottles | up to 270? | _ | _ | _ | _ |[[https:// | ||
+ | |||
+ | (The documentation is conflicted about if PLA should be ran with soft or hard mode, both seem to work. Update the wiki with settings you find work better) | ||
Add raw pellets 40-60% by weight. 100% recycled is also possible, but worse quality, not yet tested in the lab. | Add raw pellets 40-60% by weight. 100% recycled is also possible, but worse quality, not yet tested in the lab. | ||
Line 66: | Line 69: | ||
* Blog posts | * Blog posts | ||
* [[https:// | * [[https:// | ||
+ | * Download links for printing accessories: | ||
plasticrecycling.txt · Last modified: 2022-06-01 00:17 by MirZa