Differences

This shows you the differences between two versions of the page.

--- prusa_i3_mk_2 [2018-09-06 19:39] – [Rules] DavidW
+++ prusa_i3_mk_2 [2019-04-28 16:34] – [Original Prusa i3 MK2] DavidW
@@ Line 1: / Line 1: @@
-====== Original Prusa i3 MK2 ======
+====== Original Prusa i3 MK2 (CURRENTLY NOT IN LAB)======
-David Weis decided to lend us his Original Prusa i3 MK2 printer.
-He can be rewarded for his generosity in the form of vegan goodies ^_^
 ===== Costs =====
-^Material^Members/funders^
+^Material^Members/funders^Non-members^
-|PLA|TBD (£0.30/m)|
+|PLA|£0.30/m|£4/hour|
 ===== Materials =====
+See [[3dprinters#Approved filaments]]
 The printer can be used for printing with //PLA// or //PETG// filament, with a //1.75mm// diameter.\\
-Other filaments have to be disucces on the mailing list and need final vettoing from David. If you wish to print with ABS then additional ventilation will be required to deal with styrene fumes.
+Other filaments have to be discussed on the mailing list. If you wish to print with ABS then additional ventilation will be required to deal with styrene fumes.
-//TPU// or //TPE// flexible filaments (such as NinjaFlex) may be used but require use of talcom powder or painters tape on the PEI print surface.\\
+//TPU// or //TPE// flexible filaments (such as NinjaFlex) may be used but require use of talcum powder or painters tape on the PEI print surface.\\
 __PEI SHEET WILL GET DAMAGED IN CASE YOU PRINT TPU DIRECTLY ON IT!!!__
-Use of your own filament is only allowed with a previous discussion with other members to prevent usage of low quality or nonsuitable filament.
+Use of your own filament is only allowed with a previous discussion with other members to prevent usage of low quality or non-suitable filament.
 ===== Rules =====
@@ Line 28: / Line 26: @@
   * Wait for the bed to cool before attempting to remove a print
   * Send an email to the mailing list in advance before doing a long print
-  * Do NOT use sharp tools to remove a print from the bed. You could damage the PEI sheet.
+  * Do not use sharp tools to remove a print from the bed. You could damage the PEI sheet.
   * Do not user gcode generated for other printers on this printer