Differences

This shows you the differences between two versions of the page.

--- prusa_i3_mk_3 [2019-09-22 15:27] – [Software] MirZa
+++ prusa_i3_mk_3 [2022-05-16 19:53] – simon
@@ Line 1: / Line 1: @@
-====== Original Prusa i3 MK3 ======
+====== Original Prusa i3 MK3s ======
 Miron Zadora is lending his printer to the lab
@@ Line 40: / Line 40: @@
 ===== Calibration =====
-The Prusa MK3 will automatically calibrate before every print.\\
+The Prusa MK3s will automatically calibrate before every print.\\
 Do not use the calibration option on your own without a previous discussion on the mailing list.\\
@@ Line 46: / Line 46: @@
 ===== Firmware =====
-Printer is using an unmodified version of the the original Prusa MK3 firmware. We have no intention of changing this.
+Printer is using an unmodified version of the the original Prusa MK3s firmware. We have no intention of changing this.
 ===== Printing Instructions =====
@@ Line 53: / Line 53: @@
 If you want some guidance here is a perfect quick start guide from Prusa Research: https://www.prusa3d.com/new-user-mk3/
+===== Revo RapidChange nozzles =====
+It's now possible to print more detailed or larger prints as the new
+nozzles can be quickly unscrewed by hand and swapping them takes less then
+a minute.
+The normal nozzle size is 0.4mm, and is marked with a RED cover. Make sure
+you have the correct one installed before starting a print and please swap
+back to 0.4 when you're finished with a differently sized one
+We currently have 0.25, 0.4, 0.6 and 0.8mm brass nozzles, hopefully
+hardened ones for abrasive materials will be released later.
+  * https://e3d-online.com/products/revo-nozzles
+  * https://www.youtube.com/watch?v=-wy4IUbpVgA
 ===== Documentation =====