Differences

This shows you the differences between two versions of the page.

--- todo [2016-06-23 22:25] – tim
+++ todo [2016-10-14 15:57] – [Finish moving the workshop from G2 to G8] tim
@@ Line 1: / Line 1: @@
 ====== Things To Do / How Can I Help? ======
-===== New Room =====
+===== Mini Projects =====
-Recycling:
+==== Drill organisation ====
-  * <del>Take the dismantled workbenches (outside workshop G2) to the recycling centre</del>
+All of our drills (bits) currently sit in a single box. We should have a storage system for making it easier to find the right type and size, and to see what we have or what is missing.
-  * Take the waste electronics (in old storeroom G8) to the recycling centre
-  * Take your [[clutter|junk]] away [**EVERYONE**]
-G11:
+  * Make or buy an organiser:
+    * Multiple holes for each size of drill (because one drill of each size is not enough for a hackerspace)
+    * Sections for HSS, brad-point and masonry
+  * Audit the drills. Dispose of bad ones. Sharpen where possible. Identify what we need to purchase for replacements/spares.
+  * Identify a suitable drill sharpening system to keep the drills in good condition.
-  * <del>Wipe down walls (very dusty)</del>
+==== Finish moving the workshop from G2 to G8 ====
-  * <del>Vacuum/clean cable conduits and wooden trim</del>
-  * Wipe down cable conduits
-  * Arrange disposal/re-homing of the desks [Al]
-  * <del>Run a Cat5 cable from G1 ceiling space to G11 ceiling space</del>
-  * <del>Install wifi access point in G11 and configure with VLAN for access controller [Tim]</del>
-  * <del>Purchase electronic lock release [Al] Locks ordered 6/6/16</del>
-  * <del>Fit electronic lock release [Costa]</del>
-  * <del>Finish wiring access controller [Tim]</del>
-  * <del>Order door closer [Tim]</del>
-  * <del>Order additional shelving [Tim]</del>
-  * <del>Fit door closer</del>
-  * <del>Assemble additional shelving</del>
-  * <del>Assemble 2nd round of shelving (due Fri 17th). Bolt units together this time to try and keep it straight. [Tim]</del>
-  * Acquire server rack
-  * <del>Assemble final two shelf units</del>
-  * Fit twin-slot shelving over sink area - postpone, see what's left after we do the new workshop
-  * <del>After moving existing shelf units:</del>
-    * <del>Fit panels above shelves to prevent items falling behind them, and to secure to the wall [Costa]</del>
-  * Source a pull-handle and build a capacitive touch sensor
-  * Fit PIR sensor <del>and door-closed sensor</del> to G11 [Tim]
-  * Final clear-out from G8 to G11
-G8:
+  * Clean the blue storage bins in G8
+  * Move the tools and supplies from G2 to G8
-  * Measure room and create a plan in Sweet Home 3D
+  * Organise the shelves in G8, label them so tools can be returned to the same place each time.
-  * Agree new layout [**EVERYONE**]
+  * Move the chemicals from G1 to G8 (under the sink). Dispose of empty containers.
-  * Build and install fitted workbench
+  * Fit a smoke alarm in G8 (early warning system to avoid causing an evac of Summerhall).
-  * Install wall-mounted tool boards
-  * Install wall-mounted shelves
-  * Build an air filtering system to capture dust (since G8 doesn't have extraction or a window)
-  * Build a dust extraction system to capture dust from the power tools
-  * Purchase and install sensitive smoke alarm(s) to warn us before we cause a building evacuation
-Financial:
-  * Recruit more members to help us pay for the room [**EVERYONE**]
-  * Notify council of status change and apply for rates discount
 ===== Other Stuff =====
@@ Line 54: / Line 25: @@
   * Design a test pattern for checking/calibrating the laser cutter
   * Update OpenStreepMap to identify all the local takeaways
-  * Make some door wedges
+  * Sort the PC parts and peripherals
+  * Build a webapp to view [[http://spaceapi.net|Space API]] data
+----
+===== Completed Projects =====
+==== Fit shelving under G8 workbenches ====
+We want to install shelving under the section of workbench to the right of the drill press. Just one shelf, to divide the space into two.
+==== Relocate extraction vent in G11 Store Room ====
+The extract vent is currently located in the left corner as you enter the room. It should be relocate to the tile above the rear of the server rack, to better capture the hot air. We have an extra length of flexible hose that should enable this.
+==== Install ventilation in G8 Workshop ====
+We have permission from Summerhall to install a fan in the external wall. There are two sections where previous vents have been bricked-up, and one of these should be opened and a fan installed.
+  * Plan how to remove the bricks safely and without damaging the rest of the wall.
+  * Source a suitable fan.
+  * Do the work...
+  * Clean/repaint as required.