Differences

This shows you the differences between two versions of the page.

--- todo [2016-09-11 22:55] – tim
+++ todo [2019-08-29 10:53] – [Bigger Tasks] tim
@@ Line 1: / Line 1: @@
-====== Things To Do / How Can I Help? ======
+====== To-Do (How can I help?) ======
-===== New Room =====
+See also [[https://roundup.ehlab.uk/|Roundup]] and the [[members_nights|Members' Nights]] list.
-G11:
+===== Small Tasks =====
-  * Fit PIR sensor <del>and door-closed sensor</del> to G11 [Tim]
+These should be immediately actionable, describable in a single bullet point and take up to 30 minutes for one person to complete:
-G8:
+  * Tidy and clear-out the kitchen cupboard. Should only contain cleaning supplies.
+  * G1 hifi shelves: replace the short brackets with long brackets (we have a surplus and the shelf would be more secure).
+  * Laser Cutter #1: Connect the air-flow sensor into the safety loop (in series with the lid switch, water flow sensor, etc).
+  * Wire-up LEDs for one remaining tool locker.
+  * Secure tool locker LED wiring with hot glue (at the point where the wires meet the LED strip).
+  * Install a locker controller and LED in the battery-charging compartment.
-  * Arrange disposal/re-homing of the desks [Al]
+===== Bigger Tasks =====
-  * <del>Build an air filtering system to capture dust (since G8 doesn't have extraction or a window)</del>
-    * Fit an external extractor fan (permission has been granted by Summerhall)
+These should be immediately actionable, describable in a single bullet point and take 1-3 hours for 1-2 people to complete:
-  * Build a dust extraction system to capture dust from the power tools
-  * Purchase and install sensitive smoke alarm(s) to warn us before we cause a building evacuation
+  * Pull additional Cat5 cables from between G11 and G14.
-  * Build a standalone workbench (either 150x75cm or 180x75cm)
+  * Specify and purchase shelving for G14 (full-lengths, 300mm depth).
-  * Fit shelf under right-section of new workbenches (40cm depth, wall-mounted)
+===== Infrastructure Projects =====
+More tasks may be found on the [[start#projects|infrastructure project pages]].
+===== Mini Projects =====
+Projects might require planning or additional purchases before they can be tackled. Some projects will need their own pages and a link from here.
+==== Repair Tektronix oscilloscope ====
+Scope has a power supply fault, and probably needs a capacitor replacement.
+==== Repair Rigol DS1102D oscilloscope ====
+One channel has failed, believed to be in the front-end. Device is out of warranty and Rigol cannot offer replacement parts that would be economically worth-while.
+This schematic might help: http://rigol.codenaschen.de/index.php/Schematics
 ===== Other Stuff =====
   * Design a test pattern for checking/calibrating the laser cutter
-  * Update OpenStreepMap to identify all the local takeaways
+  * Build a webapp to view [[http://spaceapi.net|Space API]] data
-  * Sort the PC parts and peripherals
-  * <del>Make some door wedges</del>