Differences

This shows you the differences between two versions of the page.

--- todo [2016-09-27 09:41] – tim
+++ todo [2016-10-07 14:01] – tim
@@ Line 2: / Line 2: @@
 ===== Mini Projects =====
-==== Fit shelving under G8 workbenches ====
-We want to install shelving under the section of workbench to the right of the drill press. Just one shelf, to divide the space into two.
-Status: Tim has fitted a frame and started cutting the boards to make the shelves.
 ==== Drill organisation ====
@@ Line 19: / Line 13: @@
   * Identify a suitable drill sharpening system to keep the drills in good condition.
-==== Install ventilation in G8 Workshop ====
+==== Finish moving the workshop from G2 to G8 ====
-We have permission from Summerhall to install a fan in the external wall. There are two sections where previous vents have been bricked-up, and one of these should be opened and a fan installed.
+  * Mount the wall-mounted bins in G8
+  * Move the tools and supplies from G2 to G8
+  * Organise the shelves in G8, label them so tools can be returned to the same place each time.
+  * Move the chemicals from G1 to G8 (under the sink). Dispose of empty containers.
+  * Fit a smoke alarm in G8 (early warning system to avoid causing an evac of Summerhall).
-  * Plan how to remove the bricks safely and without damaging the rest of the wall.
+===== Other Stuff =====
-  * Source a suitable fan.
-  * Do the work...
-  * Clean/repaint as required.
-==== Relocate extraction vent in G11 Store Room ====
+  * Design a test pattern for checking/calibrating the laser cutter
+  * Update OpenStreepMap to identify all the local takeaways
+  * Sort the PC parts and peripherals
+  * Build a webapp to view [[http://spaceapi.net|Space API]] data
-The extract vent is currently located in the left corner as you enter the room. It should be relocate to the tile above the rear of the server rack, to better capture the hot air. We have an extra length of flexible hose that should enable this.
+----
-===== New Room =====
+===== Completed Projects =====
-G11:
+==== Fit shelving under G8 workbenches ====
-  * Fit PIR sensor <del>and door-closed sensor</del> to G11 [Tim]
+We want to install shelving under the section of workbench to the right of the drill press. Just one shelf, to divide the space into two.
-G8:
+==== Relocate extraction vent in G11 Store Room ====
-  * Arrange disposal/re-homing of the desks [Al]
+The extract vent is currently located in the left corner as you enter the room. It should be relocate to the tile above the rear of the server rack, to better capture the hot air. We have an extra length of flexible hose that should enable this.
-  * <del>Build an air filtering system to capture dust (since G8 doesn't have extraction or a window)</del>
-    * Fit an external extractor fan (permission has been granted by Summerhall)
+==== Install ventilation in G8 Workshop ====
-  * Build a dust extraction system to capture dust from the power tools
-  * Purchase and install sensitive smoke alarm(s) to warn us before we cause a building evacuation
+We have permission from Summerhall to install a fan in the external wall. There are two sections where previous vents have been bricked-up, and one of these should be opened and a fan installed.
-  * Build a standalone workbench (either 150x75cm or 180x75cm)
-  * Fit shelf under right-section of new workbenches (40cm depth, wall-mounted)
+  * Plan how to remove the bricks safely and without damaging the rest of the wall.
+  * Source a suitable fan.
+  * Do the work...
+  * Clean/repaint as required.
-===== Other Stuff =====
-  * Design a test pattern for checking/calibrating the laser cutter
-  * Update OpenStreepMap to identify all the local takeaways
-  * Sort the PC parts and peripherals
-  * <del>Make some door wedges</del>