Differences

This shows you the differences between two versions of the page.

--- ultimaker2 [2017-09-25 19:21] – [Ultimaker 2] THX1138
+++ ultimaker2 [2018-09-06 20:43] – [Materials] DavidW
@@ Line 4: / Line 4: @@
 It has a build volume of 225 x 230 x 205 mm (final value is height).
+Non-standard parts:
+  * Olsson block
+  * Bondtech QR 3mm extruder kit (requires updated firmware from https://github.com/TinkerGnome/Ultimaker2Marlin/releases)
 ===== Costs =====
@@ Line 11: / Line 15: @@
 ===== Materials =====
+See [[3dprinters#Approved filaments]]
 The printer can operate using PLA or ABS filament, with a 2.85mm diameter (sometimes sold as 3mm). PLA is preferred as it is cleaner to work with. If you wish to print with ABS then additional ventilation will be required to deal with styrene fumes.
@@ Line 29: / Line 35: @@
 Download the Cura software from: http://software.ultimaker.com/
+**Try not to let Cura update the firmware on the printer to the official one, as the upgraded extruder requires TinkerGnome.** See below if this happens.
+===== Firmware =====
+Due to the improved extruder, this printer has been upgraded to TinkerGnome Marlin. If cura has updated the firmware to the official UM2 release, you'll have to reinstall TinkerGnome from https://github.com/TinkerGnome/Ultimaker2Marlin/releases.
 ===== Quick-start guide =====
@@ Line 51: / Line 64: @@
 [[http://support.3dverkstan.se/article/23-a-visual-ultimaker-troubleshooting-guide|A visual Ultimaker troubleshooting guide]]\\
 [[http://support.3dverkstan.se/article/30-getting-better-prints|Hints and tips for getting better prints]]
+===== Log =====
+-11-29:
+  * Bondtech QR 3mm extruder fitted
+  * Tinker-Marlin firmware 17.10.1 installed (from https://github.com/TinkerGnome/Ultimaker2Marlin/releases)
+  * Tuned PID on the head