Differences

This shows you the differences between two versions of the page.

--- voron_2_4_r2 [2023-04-29 16:02] – jaso55555
+++ voron_2_4_r2 [2023-06-08 11:43] – simon
@@ Line 1: / Line 1: @@
-====== Voron 2.4 r2 ======
+====== Voron 2.4 r2 (300mm³) ======
 Lended to the lab by Jacob Lewis
@@ Line 5: / Line 5: @@
 ===== Costs =====
-^Material^Members/funders^Non-members^
+See [[3dprinters#costs]].
-|PLA|£0.30/m|£4/hour|
 ===== Materials =====
@@ Line 49: / Line 48: @@
 ==== PrusaSlicer: ====
-Please use [[https://github.com/prusa3d/PrusaSlicer/releases/tag/version_2.6.0-alpha6|this beta version]] as it is the only one which supports Klipper, which we use.
+The minimum supported version of PrusaSlicer is [[https://github.com/prusa3d/PrusaSlicer/releases/tag/version_2.6.0-alpha6| 2.6.0-alpha6]] as it is the only one which supports Klipper, which we use.
 The config file can be found [[https://github.com/Jaso55555/MyVoronConfig/blob/main/PrusaSlicer_config_bundle.ini|here]].
+First, under the printer selection dropdown menu, click "Add/remove printers" -> "Add/remove presets",
+then tick the box under "Other Vendors -> Voron", then on the new Voron section check "Voron FFF -> Voron v2 Afterburner Family -> Voron v2 300mm3 -> 0.4mm nozzle"
+Then import the config file using "File -> Import -> Config Bundle"
+Do check you're using the correct profiles as seen in this image:
+{{::voron_prusaslicer_settings_preview.png?direct&400|}}
+Do also check that the printer is connected properly. Go to the circled cog and hit test to see if it is working. If not, fill in the boxes using the settings for the superslicer setup below.
 ==== Super Slicer: ====