====== 3D Printers ======

===== Costs =====

^Material^Members/funders^Non-members^
|1.75mm PLA|£0.30/m|£4/hour|
|3.00/2.85mm PLA|£0.50/m|£4/hour|

===== Working Printers =====

|{{:prusa_mk4_large.jpeg?direct&200|}} \\ **[[3dprinters:prusa_mk4|Original Prusa MK4]]** | **Owner:** Miron Zadora \\ **Filament:** 1.75 mm \\ **Location:** G14|
|{{:prusa_mini_large.jpeg?direct&200|}} \\ **[[3dprinters:prusa_mini|Original Prusa Mini]]** | **Owner:** Miron Zadora \\ **Filament:** 1.75 mm \\ **Location:** On holiday|
|{{:voron_large.jpeg?direct&200|}} \\ **[[voron_2_4_r2|Voron 2.4r2]]** | **Owner:** Jacob Lewis \\ **Filament:** 1.75 mm \\ **Location:** G14|


===== Hibernating Printers =====


=== Ultimaker 2 ===

|{{:ultimaker2_large.jpeg?direct&200|}} \\ [[ultimaker2|Ultimaker 2]] | **Ownership:** Hacklab (Bought December 2014) \\ **Filament:** 3.00/2.85mm \\ **Location:** G11|





====== Printer Graveyard =====

=== 3D RepRap ===
[[http://reprap.org/wiki/RepRap|3D RepRap]]\\
Ownership: Matt Ellis\\
RAMPS 1.2 board, the electronics board that controls the printing process.\\
Location:in the store, \\
Status: semi-working, (worked before, was damaged, needs rewiring)

=== Maker Bot ===
Ownership: <del>long-term loan from</del>donated to the lab by Fib\\
Status: Currently not working, (worked before)\\
Extruder isn't working and the firmware on it is the wrong one. Needs loads of work. 

=== Prusa Style ===
Ownership: unclear\\
Work in progress. Needs firmware reloaded and motor connectors put onto the cables.