User Tools

Site Tools


heating

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
heating [2020-06-13 13:46] – created riverheating [2023-02-04 13:01] (current) river
Line 1: Line 1:
 ====== Heating ====== ====== Heating ======
  
-The electric heaters in G1 and G14 are controlled by Sonoff devices over the network. Room temperature is acquired by an ESP8266 room sensor, the thermostat is a python script at carbon:/srv/docker/py3scripts/scripts/thermostat.+===== Using ===== 
 + 
 +The G1 heater thermostat can be set from the control panel or mqtt. 
 + 
 +The G14 heater is manual. 
 + 
 +There is also central heating from Summerhall, which is switched on rarely. Panels are above the windows of G1, and above the test gear in G14. It can by adjusted with the knobs. 
 + 
 +===== Implementation Details ===== 
 + 
 +The electric heater in G1 is controlled by a radio switched socket. Room temperature is determined by the wireless sensor with DS18B20, LDR, and two AA batteries on the G1 table, the thermostat is a python script at carbon:/srv/docker/py3scripts/scripts/thermostat
 + 
 +Target temperature can be changed by [[mqtt|MQTT Message Bus]] messages, which can be sent by the control panel in G1, or by your computer.
  
-Target temperature can be changed by mqtt messages, which can be sent by the control panel in G1, or by your computer. 
  
-There is also central heating from Summerhall in G1, which is switched on rarely. It is hidden in the panels above the windows. It can by adjusted with the knobs. 
heating.1592056003.txt.gz · Last modified: 2020-06-13 13:46 by river

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki