Differences

This shows you the differences between two versions of the page.

--- heating [2024-11-30 10:14] – [TODO] simon
+++ heating [2025-02-16 20:03] (current) – [TODO] aria
@@ Line 11: / Line 11: @@
 ===== Implementation Details =====
-The electric heaters in G1, G2 and G8 are controlled by multiple WiFi switched sockets. Room temperature is determined by the environment sensors (ehl-vm-things:/srv/docker/py3scripts/scripts/co2-sensors) <del>wireless sensor with DS18B20, LDR, and two AA batteries on the G1 table</del>, the thermostat is a python script at ehl-vm-things:/srv/docker/py3scripts/scripts/thermostat.
+The electric heaters in G1, G2 and G8 are switched by multiple WiFi sockets. Room temperature is determined by the LoRaWAN connected environment sensors (ehl-vm-things:/srv/docker/py3scripts/scripts/co2-sensors), or in G1 the sensor on the table (with DS18B20, LDR, and two AA batteries). Room presence is determined by the PIRs OR environment sensors (ehl-vm-things:/srv/docker/py3scripts/idle-monitor).
+The thermostat is a python script at ehl-vm-things:/srv/docker/py3scripts/scripts/thermostat.
 Target temperature can be changed by [[mqtt|MQTT Message Bus]] messages, which can be sent by the control panel in G1, or by your computer.
@@ Line 19: / Line 21: @@
 ===== TODO =====
-  * Add temperature target charges to #things discord channel
+  * Fan heater boost mode
   * Warn when the heater power is set too high and turn the plug off
+  * Repair the G2 PIR
+  * Repair the G14 PIR
+  * Stop using cloud-based temperature and presence detection
 ==== Example Stats ====