lasercutter2
Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revisionNext revisionBoth sides next revision | ||
| lasercutter2 [2019-07-13 00:12] – DavidW | lasercutter2 [2019-07-23 22:46] – [Recommended Settings] mirza | ||
|---|---|---|---|
| Line 3: | Line 3: | ||
| TRAINING REQUIRED BEFORE USE.\\ | TRAINING REQUIRED BEFORE USE.\\ | ||
| (Note: Access control is ad-hoc, Ask someone to add you after you have received a walkthrough.) | (Note: Access control is ad-hoc, Ask someone to add you after you have received a walkthrough.) | ||
| - | |||
| - | HOURS OF USE ARE LIMITED TO **8PM-8AM** UNTIL ADDITIONAL FUME EXTRACTION HAS BEEN INSTALLED. | ||
| Model JD90125\\ | Model JD90125\\ | ||
| Line 30: | Line 28: | ||
| | Acrylic 1mm | 30 | 40 | Miron | | | Acrylic 1mm | 30 | 40 | Miron | | ||
| | Acrylic 2mm | 28 | 100 | Miron | | | Acrylic 2mm | 28 | 100 | Miron | | ||
| - | | Acrylic 3mm | < | + | | Acrylic 3mm | 17 | 100 | David | |
| | Acrylic 4mm | 15 | 100 | Miron | | | Acrylic 4mm | 15 | 100 | Miron | | ||
| | Acrylic 5mm | 12 | 100 | Miron | | | Acrylic 5mm | 12 | 100 | Miron | | ||
| Line 47: | Line 45: | ||
| | Engraving Laminate 3mm | | | | | | Engraving Laminate 3mm | | | | | ||
| - | ^ Material ^ Engrave Speed ^ (Range of) Engrave Power ^ Notes ^ | + | ^ Material ^ Engrave Speed ^ Engrave Power ^ Notes ^ |
| - | | Acrylic | | | | | + | | Acrylic | 350 | 50 | Miron | |
| - | | Ply | | | | | + | | Ply | 350 | 50 | Miron | |
| - | | MDF | | | | | + | | MDF | 350 | 50 | Miron | |
| - | | Laminate | | | | | + | | Laminate | 350 | 50 | Miron | |
| Minimum power setting for the laser to turn on: 19 | Minimum power setting for the laser to turn on: 19 | ||
| Line 63: | Line 61: | ||
| * < | * < | ||
| * < | * < | ||
| - | * Create chart of power/speed settings for common materials (as a basic rule, multiply speeds from the old chart by 3x) | + | * <del>Create chart of power/speed settings for common materials (as a basic rule, multiply speeds from the old chart by 3x)</ |
| - | * Ply ✔ | + | |
| - | * MDF ✘ | + | |
| - | * Acrylic ✘ | + | |
| * < | * < | ||
| * Update docs: | * Update docs: | ||
| Line 80: | Line 75: | ||
| * < | * < | ||
| </ | </ | ||
| - | * Create spare focus jigs (requires 12mm acrylic, or a new design) | + | * <del>Create spare focus jigs (requires 12mm acrylic, or a new design)</ |
| * Build and install monitoring system (laser usage, temperature logging) | * Build and install monitoring system (laser usage, temperature logging) | ||
| * < | * < | ||
| Line 93: | Line 88: | ||
| * < | * < | ||
| </ | </ | ||
| - | * Install ducts to roof and upgrade blower, to avoid releasing fumes onto courtyard users. **ACTION: PETE** | + | * <del>Install ducts to roof and upgrade blower, to avoid releasing fumes onto courtyard users.</ |
| * < | * < | ||
| * Replace broken acrylic cover on front-loading slot. | * Replace broken acrylic cover on front-loading slot. | ||
| Line 163: | Line 158: | ||
| * check that the rear access panel (laser power supply) is closed properly | * check that the rear access panel (laser power supply) is closed properly | ||
| * check that the access controller is logged-in | * check that the access controller is logged-in | ||
| + | |||
| + | ==== Nozzle quickly " | ||
| + | In LaserCut 5.3, File> | ||
| + | Make sure "Quick speed" is set to a sensible value like 300, work-acc to 500 and space-acc to 500 | ||
| ==== Nozzle moves but doesn' | ==== Nozzle moves but doesn' | ||
lasercutter2.txt · Last modified: 2023-12-24 13:36 by simon