User Tools

Site Tools


lasercutter

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
lasercutter [2019-07-23 21:05]
mirza [Recommended Settings]
lasercutter [2020-10-14 12:47] (current)
jtdburton
Line 34: Line 34:
 ===== Prices ===== ===== Prices =====
  
-Usage is charged by cutting time: £5 per hour for members, £15 per hour for non-members. You don't need to pay for a full hour if you don't use it.+Usage is charged by cutting time: £0.09 per minute (£5.40 per hourfor members, £15 per hour for non-members. You don't need to pay for a full hour if you don't use it.
  
 Materials cost between £1.50 (3mm MDF) and £13 (6mm acrylic), per 300x600mm sheet. [[lasermaterials|See the pricelist]]. You may provide your own materials as long as they are suitable for laser cutting. Materials cost between £1.50 (3mm MDF) and £13 (6mm acrylic), per 300x600mm sheet. [[lasermaterials|See the pricelist]]. You may provide your own materials as long as they are suitable for laser cutting.
Line 50: Line 50:
 ^ Material ^ Cut Speed ^ Cut Power ^ Notes ^ ^ Material ^ Cut Speed ^ Cut Power ^ Notes ^
 | Acrylic 3mm | 8 | 98 | From HPC Manual | | Acrylic 3mm | 8 | 98 | From HPC Manual |
 +| Acrylic 4mm | 5.5 | 98 | Recommended by Julian |
 | Acrylic 5mm | 3.5 | 98 | From HPC Manual | | Acrylic 5mm | 3.5 | 98 | From HPC Manual |
 | Acrylic 10mm | 1 | 98 | From HPC Manual | | Acrylic 10mm | 1 | 98 | From HPC Manual |
lasercutter.1563915936.txt.gz · Last modified: 2019-07-23 21:05 by mirza