Differences

This shows you the differences between two versions of the page.

--- lasercutter [2023-07-07 01:36] – [Log] tidy up MirZa
+++ lasercutter [2025-02-22 16:01] (current) – [Prices] simon
@@ Line 12: / Line 12: @@
   * [[lasercutter2|Laser Cutter #2]]
   * [[lasercutter_tips_and_tricks|Laser cutting tips and tricks]]
+**Save your project file on the local disk if it's very complex otherwise the software will be slow (because the latency of the network share slows down the compile process).**
 ===== Materials =====
@@ Line 35: / Line 38: @@
 ===== Prices =====
-Usage is charged by cutting time: £0.09 per minute (£5.40 per hour) for members, £15 per hour for non-members. You don't need to pay for a full hour if you don't use it.
+Usage is charged by cutting time: £0.09 per minute (£5 per hour) for members, £15 per hour for non-members. You don't need to pay for a full hour if you don't use it.
 Materials cost between £1.50 (3mm MDF) and £13 (6mm acrylic), per 300x600mm sheet. [[lasermaterials|See the pricelist]]. You may provide your own materials as long as they are suitable for laser cutting.
@@ Line 143: / Line 146: @@
 ===== using AutoCAD or other CAD software =====
-Save a DXF file, selecting AutoCAD DXF R12 to R14 format.
+Save a DXF file, selecting AutoCAD DXF R12 to R14 format. R14 seems to work better.
 ===== Beam Alignment (DRAFT) =====
@@ Line 343: / Line 345: @@
   * Mirrors cleaned and realigned
+-08-01:
+  * PC replaced - was: Pentium 4, 3GB RAM, 256GB HDD; now: i3-7100T, 8GB RAM, 256GB NVMe
 {{tag>equipment}}