User Tools

Site Tools


makerbot_dual

This is an old revision of the document!


Makerbot Dual - is a dual head 3D Printer. However in its current setup it is used with only one head. The reason for that is if used with one hot and one cold head the cold head trends to scrumble the print.

In order to use the printer you need to download the Makerbot Desktop software: https://www.makerbot.com/desktop

When the install is complete you need to “devices” and “Select Type of Device”. Select “Duplicator (Dual)” from the list of available devices.

makerbot_dual.1464458174.txt.gz · Last modified: 2016-05-28 17:56 by costa

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki