makerbot_dual
This is an old revision of the document!
Makerbot Dual - is a dual head 3D Printer. However in its current setup it is used with only one head. The reason for that is if used with one hot and one cold head the cold head trends to scramble the print.
In order to use the printer you need to download the Makerbot Desktop software: https://www.makerbot.com/desktop
When the install is complete you need to “devices” and “Select Type of Device”. Select “Duplicator (Dual)” from the list of available devices.
makerbot_dual.1464458204.txt.gz · Last modified: 2016-05-28 17:56 by costa