milling_accessories_pledge
This is an old revision of the document!
Table of Contents
Milling accessories pledge
We have a great CNC mill that we got for free. In order for this to be useful though, it needs a lot of accessories.
Mike has already bought and tested much of this stuff, but we need to raise funds to pay for it if it's going to be transferred into ownership of the lab so that everyone can use it.
There will be a mandatory training process for this equipment. Once we have fulfilled this pledge drive we can start providing training.
Costs:
- Vice - £30
- Parallels - £20.39
- Dial test indicator - £19.39
- Econo-probe (with spare contact assembly) - £106
- Edge finder - £5.49
- Coolant mister - £114.50
- Coolant - £9.99
- Air pump for mister - £30.49
- Draw-bar for BT30 holders - £4.89
- 8 x BT30 ER16 tool holders - £119.92
- 1 x ER16 collet set - £14.97
- 6mm roughing end mill - 1181020600 - £15.24
- 6mm finishing end mill - 3043030600 - £11.06
- 6mm ball end mill - 3073030600 - £14.95
- 2mm ball end mill - 3073030200 - £8.98
- 6mm spot drill - 8063030600 - £13.40
- 1 x 8mm ER16 collet - £2.00
- 4 x 6mm ER16 collets - £8.00
- 1 x 3mm ER16 collet - £2.00
Total: £551.66
Pledges
| Name | Amount | Paid? |
|---|---|---|
| Mike | £50 | No |
| Martin | £50 | No |
| Ritvars | £25 | No |
| Steph | £50 | No |
| Gary | £25 | No |
| Tom | £50 | No |
| Bernie | £50 | No |
| Gareth | £50 | No |
| Linny | £50 | No |
| Roz | £20 | No |
| Costa | £50 | No |
| Angelos | £50 | No |
| Al | £25 | No |
| Tim K | £20 | Yes |
| Arne | ₤30 | No |
| Total | £595 |
| Needed | £550 |
milling_accessories_pledge.1489540091.txt.gz · Last modified: 2017-03-15 01:08 by tim