User Tools

Site Tools


network

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
Next revisionBoth sides next revision
network [2019-05-24 11:00] timnetwork [2020-05-23 11:00] – [Old: HUBS] tim
Line 11: Line 11:
  
 <code> <code>
-      unifi-g6 -- switch-g11-d -- switch-roof-b -- ap-roof +     unifi-g11 -- switch-g11-d 
-                      / \ +                      / \     \ 
-                     /   \+                     /      switch-roof-b -- ap-roof
                     /     \                     /     \
-                   /      switch-roof -- tl-wr703n+                   /      switch-roof
                   /                   /
           switch-g1                    switch-g1         
Line 28: Line 28:
  
 ===== Layer 3 ===== ===== Layer 3 =====
 +
 +Internal IPv4 10.38.32.0/20.
 +
 +Routing is handled by [[servers#oxygen|oxygen]], a Dell PowerEdge R610 running RouterOS.
 +
 +==== Old: HUBS ====
  
 185.34.62.0/26 and 2a04:5d00:70::/48 provided by [[https://hubs.net.uk/|HUBS]]. 185.34.62.0/26 and 2a04:5d00:70::/48 provided by [[https://hubs.net.uk/|HUBS]].
  
-Internal IPv4 10.38.32.0/20, with an external NAT address of 185.34.62.2.+Router address: 185.34.62.1\\ 
 +External NAT address185.34.62.2 
 + 
 +This service will be ceased from 1st July 2020. 
 + 
 +==== New: Summerhall ==== 
 + 
 +Router IP: 46.226.0.133/31\\ 
 +Gateway IP: 46.226.0.132
  
-Routing is handled by a [[servers|Dell PowerEdge running RouterOS]].+We have requested an IPv6 /48 allocation.
  
 ===== WiFi ===== ===== WiFi =====
Line 39: Line 53:
 ^ Hostname ^ Location ^ SSIDs ^ ^ Hostname ^ Location ^ SSIDs ^
 | unifi-g1 | G1 (Main room) | Hacklab, spacenet | | unifi-g1 | G1 (Main room) | Hacklab, spacenet |
-| unifi-g2 | G2 (Laser/3D-printing room) | Hacklab, spacenet | +| unifi-g2 | G2 (Laser room) | Hacklab, spacenet |
-| unifi-g6 | G6 (Hot Glue'room) | Hacklab, spacenet |+
 | unifi-g8 | G8 (Workshop) | Hacklab, spacenet | | unifi-g8 | G8 (Workshop) | Hacklab, spacenet |
 +| unifi-g11 | G11 (Store room) | Hacklab, spacenet |
 +| unifi-g14 | G14 (Electronics) | Hacklab, spacenet |
 +| unifi-makerbee | Floor 2 (MakerBee's office) | spacenet |
 | ap-roof | Roof | spacenet | | ap-roof | Roof | spacenet |
  
network.txt · Last modified: 2023-10-16 13:10 by tim

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki