User Tools

Site Tools


startrite_bandsaw

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
startrite_bandsaw [2019-06-19 19:39]
alfie
startrite_bandsaw [2019-12-07 23:41] (current)
vzickus [Log]
Line 123: Line 123:
  
   * **01/​01/​1970** Template log entry. Copy this below. //Author//   * **01/​01/​1970** Template log entry. Copy this below. //Author//
-  * **09/​06/​2019** Found tool in an unusable state. Blade tracking was completely out, blade falling off back of wheels. Guide bearings were also mis-adjusted - blade was being forced into them and making a very angry noise when pulled through by hand. Spent 45 minutes re-adjusting the blade tracking to get the blade running true again, re-adjusted blade tension and guide bearings. //Alfie//+  * **09/​06/​2019** Found tool in an unusable state. Blade tracking was completely out, blade falling off back of wheels. Guide bearings were also mis-adjusted - blade was being forced into them and making a very angry noise when pulled through by hand. Spent 45 minutes re-adjusting the blade tracking to get the blade running true again, re-adjusted blade tension and guide bearings. //Alfie//  
 +  * **07/​12/​2019** Found the blade blunt. Cameron replaced it with a new one. //Vytas//
startrite_bandsaw.txt · Last modified: 2019-12-07 23:41 by vzickus