tool_access_controllers
Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revision | |||
| tool_access_controllers [2024-11-04 22:09] – [Enclosure and Wiring] tim | tool_access_controllers [2024-11-04 22:10] (current) – [Enclosure and Wiring] tim | ||
|---|---|---|---|
| Line 94: | Line 94: | ||
| More complex tools may have their own control systems (remote start/stop, VFD motor controllers, | More complex tools may have their own control systems (remote start/stop, VFD motor controllers, | ||
| - | **Noise suppression:** | + | ==== Noise suppression |
| Some motors and contactors will create electrical noise, causing the microcontroller to crash or reset. If this happens the noise should be suppressed at source. A 0.1uF or 0.22uF class X2 capacitor (fitted across live and neutral close to the source) will often resolve the issue. | Some motors and contactors will create electrical noise, causing the microcontroller to crash or reset. If this happens the noise should be suppressed at source. A 0.1uF or 0.22uF class X2 capacitor (fitted across live and neutral close to the source) will often resolve the issue. | ||
tool_access_controllers.1730758177.txt.gz · Last modified: 2024-11-04 22:09 by tim