Differences

This shows you the differences between two versions of the page.

--- workshops:arduino_to_the_next_level [2017-04-05 12:47] – external edit 127.0.0.1
+++ workshops:arduino_to_the_next_level [2017-04-09 21:41] (current) – Simon
@@ Line 1: / Line 1: @@
-This is a follow on to our Arduino for the Curious workshop and delves into some more advanced Arduino topics.
+This is a follow on to our [[arduino_for_the_curious|Arduino for the Curious]] workshop and delves into some more advanced Arduino topics.
 As with the first workshop, there are several tutorials to work through and challenges to try within each one.
@@ Line 6: / Line 6: @@
 ====== The kit ======
-You been given a kit, it has the following parts in it.
+You have been given a kit, it has the following parts in it:
   *  Liquid Crystal Display (LCD)
   *  Large breadboard
   *  5 x Male to Female jumper wires
-  *  Attiny85 - A small micro-controller that you can program using an Arduino board & software
+  *  ATtiny85 - A small micro-controller that you can program using an Arduino board & software
 ====== Tutorials ======
+[[.:arduino_to_the_next_level:lcd|Liquid Crystal Display]]
-| ^ [[.:arduino_to_the_next_level:lcd|Liquid Crystal Display]] || *  Say Hello!  *  Scrolling  *  Arrows to the Right || ^ [[.:arduino_to_the_next_level:remembering_state|Saving State when turning off your Arduino]] || *  Writing/Reading data to EEPROM || ^ [[.:arduino_to_the_next_level:ethernet_shield|Ethernet shield]] || *  using the Ethernet library  *  connecting to the network  *  doing other stuff || ^ [[.:arduino_to_the_next_level:wave_shield|Wave shield]] || *  Make Sound || ^ [[.:arduino_to_the_next_level:motor_shield|Motor shield]] || *  DC Motors  *  Stepper Motors || ^ [[.:arduino_to_the_next_level:going_tiny|Going Tiny]] || *  Using an ATTiny for smaller projects | | | | | | |
+  * Say Hello!
+  * Scrolling
+  * Arrows to the Right
+[[.:arduino_to_the_next_level:remembering_state|Saving State when turning off your Arduino]]
+  * Writing/Reading data to EEPROM
+[[.:arduino_to_the_next_level:ethernet_shield|Ethernet shield]]
+  * Using the Ethernet library
+  * Connecting to the network
+  * Doing other stuff
+[[.:arduino_to_the_next_level:wave_shield|Wave shield]]
+  * Make Sound
+[[.:arduino_to_the_next_level:motor_shield|Motor shield]]
+  * DC Motors
+  * Stepper Motors
+[[.:arduino_to_the_next_level:going_tiny|Going Tiny]]
+  * Using an ATtiny for smaller projects