Differences

This shows you the differences between two versions of the page.

--- 3dprinters:aquila [2024-07-18 23:37] – [Slicers] Genis
+++ 3dprinters:aquila [2024-07-18 23:38] (current) – [Materials] Genis
@@ Line 10: / Line 10: @@
 The bed's temperature limit is 70 degrees.
-I never had the chance to test TPU with it, but it does run a Direct Drive extruder, so it should work as long as the material can be printed under the above constraints. Unknown if bed coating is suitable for TPU.
+I never had the chance to test TPU with it, but it does run a Direct Drive extruder, so it should work as long as the material can be printed under the above constraints. Make sure you use glue stick on the bed beforehand, as to not damage the glass bed.
 ====Calibration====
 The machine does Autolevel before every print using a BLTouch probe.