User Tools

Site Tools


This is an old revision of the document!

3D Scanner

We have a NextEngine 3D Scanner SD.

Software install

  1. Download ScanStudio CORE 1.7.3 from and save to computer
  2. Download the Desktop 3D scanner drivers from and go to the download section and install
  3. After save is complete, right click in installer and go to Properties
  4. Then click on the Compatibility tab and check 'Run this program in compatibility mode for:“ and set it to Windows XP SP3 and press OK
  5. Now right click on the installer and select 'Run as administrator'
  6. Proceed to install and make sure that the 3D Scanner driver box is unchecked (if it is checked, then proceed and just ignore the errors that might pop up)
  7. ScanStudio will start with errors, but just close the software after it loads up
  8. Copy the attached DLL (wdapi901.dll) to the following directories:
    • C:\Program Files(x86)\NextEngine\ScanStudio\Driver
    • C:\Program Files(x86)\NextEngine\ScanStudio\DLL
  9. Run ScanStudio and plug in scanner

If installing on a 32-bit PC, please skip steps 7-9

3dscanner.1437685813.txt.gz · Last modified: 2015-10-05 15:55 (external edit)