Comprises:

• Three cheap RGB LED beads in series
• Cheap IR-remote LED strip controller.

Looks like a child's drawing close up.

Deus Ex Candelabra Mk II We don't talk about candelabra mk ii. There was no mark ii.

Comprises:

• 3D printed diffusion tubes? 230 degree head temperature and print slowly (like 1mm3/s?)
• 5 mm convex-topped RGB LEDs in parallel
• Controlled by one of those cheap IR remote things or a wifi-one

Comprises:

• Adafruit HUZZAH ESP8266
• Generic SK6812 3535 strip or WS2812 5050 boards
• Firmware from Jason Coon's GitHub (still under active development; need to find approach to program LED arrangement

Comprises:

• QX5252F and appropriate inductor

Comprises:

• Few transistors and diodes
• Capacitor provides soft on and off
• Special flickering LEDs with flickering IC in epoxy
• Regular LEDs in series with the flickering ones

Rationale: to decoratively box in the stuff stored on cupboard at top of stairs

Will use laser cutter to cut 3 mm plywood boards. I need to find settings (e.g. laser power to minimum necessary to cut through) to minimise the scorching/burning off the wood. I need to learn how to focus the laser cutter with my remaining eye.