prusa_i3_mk_3 [Edinburgh Hacklab]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Original Prusa i3 MK3s ======

<del>Miron Zadora is lending his printer to the lab</del>

This printer is no longer present

===== Costs =====

See [[3dprinters#costs]].

===== Materials =====

See [[3dprinters#Approved filaments]]

The printer can be used for printing with //PLA// or //PETG// filament, with a //1.75mm// diameter.\\
Other filaments have to be discussed on the mailing list. If you wish to print with ABS then additional ventilation will be required to deal with styrene fumes.

//TPU// or //TPE// flexible filaments (such as NinjaFlex) may be used but only on the //Textured steel sheet// or with the use of talcum powder or painters tape on the smooth steel sheet\\
__SMOOTH SHEET WILL GET DAMAGED IN CASE YOU PRINT TPU DIRECTLY ON IT!!!__ (TPU fuses with the PEI surface)

==== How to print with TPU filament on the Prusa Mk3s ====
  - In PrusaSlicer, select the "Generic FLEX" filament profile
      - If it is not highlighted, click "Add/Remove fillaments" and in the windows that appeared select \\ //Printer: (All), Type: FLEX, Profile: Generic FLEX//, and tick the box next to Generic FLEX and click Finish
  - With Generic FLEX selected, go to the Filament Settings tab in PrusaSlicer and modify the nozzle temperature for first layer and other layers to the fillament manufacturer recommended settings
  - Slice file, and load the filament as before
  - Swap the smooth steel sheet with the //textured steel sheet//
  - Switch from //Smooth1// to //Textur1// by pressing the knob with the Sheet option highlighted in the main menu
      - The prusa has a setting in the main menu for switching [[https://help.prusa3d.com/article/steel-sheet-profiles_1955 | steel sheet profiles]], so that different z-leveling values can be saved separately.
  - Loosen the feeder gear tension to the lowest it will go with an allen key: [[https://help.prusa3d.com/article/idler-screw-tension_177367]]
      - Make sure the screw is still fully in the nut on the right side of the head
  - To be safe, turn down the printing speed to about 60% by turning the knob counterclockwise while in the main menu
      - you may find this is not necessary if the filament sticks well
      - if you don't want to do this every print, you can modify the speed settings in prusaslicer instead
  - When done, change the sheet, sheet profile, unload filament and tighten the idler screw so that it is flush with the surface
===== Rules =====

  * Do not hack. The 3D printer is a tool, not a project. (This includes installing custom firmware or anything that you may consider **upgrading**)
  * Use material supplied by the lab.
  * If you want to use your own material, it must be of good quality and approved before use (post to the members list).
  * If you want to use ABS (or other materials which produce fumes) you must relocate the printer to somewhere with good ventilation, flush out the ABS after use and return the printer to its normal place.
  * Wait for the bed to cool before attempting to remove a print
  * Send an email to the mailing list in advance before doing a long print
  * Do not use sharp tools to remove a print from the bed. You could damage the PEI sheet.
  * Do not user gcode generated for other printers on this printer
  * Do not swap the SD cards between printers

===== Software =====

[[https://www.prusa3d.com/prusaslicer/|PrusaSlicer]] - very user friendly, has a simple and an expert mode, suited for new and experienced users alike 

If you wish to use a different slicer you can ask on the mailing list. But unless you have a very good reason to use a different one it's advised to stick with the listed options.

===== Calibration =====

The Prusa MK3s will automatically calibrate before every print.\\
Do not use the calibration option on your own without a previous discussion on the mailing list.\\

Different materials may require different Z-offsets. If you want to change the Z-offset, make sure to first note down the previous setting and change it back when you're done.
===== Firmware =====

Printer is using an unmodified version of the the original Prusa MK3s firmware. We have no intention of changing this.

===== Printing Instructions =====

Unless you are experienced with 3D printing it is highly recommended that you ask on the mailing list for help with your first few prints.

If you want some guidance here is a perfect quick start guide from Prusa Research: https://www.prusa3d.com/new-user-mk3/

===== Revo RapidChange nozzles =====

It's now possible to print more detailed or larger prints as the new
nozzles can be quickly unscrewed by hand and swapping them takes less then
a minute.

The normal nozzle size is 0.4mm, and is marked with a RED cover. Make sure
you have the correct one installed before starting a print and please swap
back to 0.4 when you're finished with a differently sized one

We currently have 0.25, 0.4, 0.6 and 0.8mm brass nozzles, hopefully
hardened ones for abrasive materials will be released later.

  * https://e3d-online.com/products/revo-nozzles
  * https://www.youtube.com/watch?v=-wy4IUbpVgA

===== Documentation =====

https://prusa3d.com/downloads/manual/prusa3d_manual_mk3_en.pdf\\