ultimaker2
Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
| ultimaker2 [2023-06-08 11:44] – simon | ultimaker2 [2024-08-17 00:13] (current) – river | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| ====== Ultimaker 2 ====== | ====== Ultimaker 2 ====== | ||
| + | |||
| + | **N.B.** This printer normally has a glass build plate. The instructions below are for this. River is experimenting with a PEI plate, which you might find installed. If unsure please ask River or Miron, and avoid damaging the plate. | ||
| We bought an Ultimaker 2 3D printer in December 2014. Thanks to all those who [[3dprinterpledges|helped fund it]]. | We bought an Ultimaker 2 3D printer in December 2014. Thanks to all those who [[3dprinterpledges|helped fund it]]. | ||
| Line 13: | Line 15: | ||
| ===== Costs ===== | ===== Costs ===== | ||
| - | See [[3dprinters# | + | See [[3dprinters# |
| ===== Materials ===== | ===== Materials ===== | ||
| Line 19: | Line 21: | ||
| See [[3dprinters# | See [[3dprinters# | ||
| - | The printer can operate using PLA or ABS filament, with a 2.85mm diameter (sometimes sold as 3mm). PLA is preferred as it is cleaner to work with. If you wish to print with ABS then additional ventilation will be required to deal with styrene fumes. | + | The printer can operate using all the normal |
| - | + | ||
| - | NinjaFlex (a flexible plastic) may also be used. [Question: Does this produce fumes?] | + | |
| - | + | ||
| - | We may wish to restrict printing to materials supplied by Hacklab to ensure that cheaper or inappropriate materials do not damage | + | |
| ===== Rules (proposed) ===== | ===== Rules (proposed) ===== | ||
| Line 33: | Line 31: | ||
| * Clean the build plate after use. | * Clean the build plate after use. | ||
| - | ===== Software | + | ===== Slicers |
| - | Download the Cura software from: http:// | + | Cura is the standard one for this printer, but you can also prusa slicer, which I think most people prefer. You need to be a bit careful with it though because it doesn' |
| **Try not to let Cura update the firmware on the printer to the official one, as the upgraded extruder requires TinkerGnome.** See below if this happens. | **Try not to let Cura update the firmware on the printer to the official one, as the upgraded extruder requires TinkerGnome.** See below if this happens. | ||
| Line 42: | Line 40: | ||
| Due to the improved extruder, this printer has been upgraded to TinkerGnome Marlin. If cura has updated the firmware to the official UM2 release, you'll have to reinstall TinkerGnome from https:// | Due to the improved extruder, this printer has been upgraded to TinkerGnome Marlin. If cura has updated the firmware to the official UM2 release, you'll have to reinstall TinkerGnome from https:// | ||
| - | |||
| ===== Quick-start guide ===== | ===== Quick-start guide ===== | ||
| - | - Obtain your model(s) in STL format. | + | - Obtain your model(s) in 3MF or STL format. |
| - Install cura. The .AppImage file you get for linux is an executable. | - Install cura. The .AppImage file you get for linux is an executable. | ||
| - Select Olsson block option. Select nozzle setting 0.4mm, which is the default. | - Select Olsson block option. Select nozzle setting 0.4mm, which is the default. | ||
| Line 54: | Line 51: | ||
| - Once you're happy with the positioning and settings, save the GCode using '' | - Once you're happy with the positioning and settings, save the GCode using '' | ||
| - [[https:// | - [[https:// | ||
| - | - Measure the diameter of the filament you are using and set this in the printer. The filament may not be exactly what it is labelled as. | + | - (Optional) |
| - | - Coat the build plate with a thin layer of glue using a glue stick, under where the part(s) will be printed. | + | - Coat the glass build plate with a thin layer of glue using a glue stick, under where the part(s) will be printed. May not be needed depending on what you are printing. |
| - Using the controls on the printer, go to '' | - Using the controls on the printer, go to '' | ||
| - Note down the length of filament to be used by the print and pay based on the costs above. | - Note down the length of filament to be used by the print and pay based on the costs above. | ||
| Line 63: | Line 60: | ||
| - Once the print is finished, wait for the printer to cool down and say it's okay to remove the part. You can remove it earlier, but you risk deforming the printed part or burning yourself on all the hot bits. | - Once the print is finished, wait for the printer to cool down and say it's okay to remove the part. You can remove it earlier, but you risk deforming the printed part or burning yourself on all the hot bits. | ||
| - Clean the glue off the build plate with a damp cloth. | - Clean the glue off the build plate with a damp cloth. | ||
| + | |||
| ===== Documentation ===== | ===== Documentation ===== | ||
| Line 71: | Line 69: | ||
| ===== Log ===== | ===== Log ===== | ||
| + | |||
| + | 2024-08-17 | ||
| + | |||
| + | * Experimenting with prusa smooth PEI build plate. It works. | ||
| + | |||
| + | 2024-05-10 | ||
| + | * Moved to G14 for recommissioning. Belts jumping - nasty grinding noise, printer loosing position. | ||
| + | * Cleaned and oiled rails. Now working. Unknown oil from oil can. | ||
| + | |||
| + | 2023-08-03 | ||
| + | * Belts are heard creaking, might need replacing within a year - Miron | ||
| + | |||
| + | 2019-11-?? | ||
| + | * Belts were replaced to stop creaking noise | ||
| + | * LEDs were replaced as they started flickering. Spare 24V LEDs are in the infrastructure box | ||
| 2017-11-29: | 2017-11-29: | ||
ultimaker2.1686224647.txt.gz · Last modified: 2023-06-08 11:44 by simon