Differences

This shows you the differences between two versions of the page.

--- voron_2_4_r2 [2024-01-18 16:20] – jaso55555
+++ voron_2_4_r2 [2025-03-02 03:52] (current) – build volume MirZa
@@ Line 1: / Line 1: @@
 ====== Voron 2.4 r2 (300mm³) ======
-Lended to the lab by Jacob Lewis
+Lent to the lab by Jacob Lewis
+Build volume is 290mm x 290mm build plate x 260mm high
 ===== Costs =====
@@ Line 12: / Line 14: @@
 ==== PLA ====
-  * [[https://www.esun3d.com/|eSun]]
+  * [[https://www.esun3d.com/|eSun]]. ePLA matte is recommended; cheap, prints very nicely, matte finish looks wonderful.
-    * ePLA matte is recommended; cheap, prints very nicely, matte finish looks wonderful.
+  * Some of Farnell's own brand "Multicomp" appears to be made by eSun. Certainly the ePLA matte, including the iconic "Femboy pink". It is available a bit cheaper than the eSun on amazon if you order through a university account.
   * [[https://hatchbox3d.com/|Hatchbox]]
   * [[https://uk.rs-online.com/web/c/computing-peripherals/3d-printing-scanning/3d-printing-materials/|RS Pro]]
@@ Line 29: / Line 31: @@
   * [[https://www.esun3d.com/|eSun]]
-    * ABS+ is recommended, prints easier than other brands, and has a nice matte finish
+    * ABS+ is recommended, prints easier than other brands/types, and has a nice matte finish
 Please open the window and dangle the exhaust pipe outside for the duration of your print.
 ==== TPU/TPE ====
-Please use the alternate bed kept to the left of the printer, although this bed cannot be run above 60 degrees or the PET coating will be damaged.
+  * [[https://www.esun3d.com/|eSun]]
+Please use the carbon fibre bed, usually kept to the left of the printer. This bed cannot be run above 60 degrees or the PET coating will be damaged.
 ==== Other Materials ====
@@ Line 74: / Line 78: @@
   * PrusaSlicer (Minimum supported version is 2.6.0)
-  * SuperSlicer (Note recent versions have been buggy)
+  * SuperSlicer (Depricated)
 ==== PrusaSlicer: ====
@@ Line 83: / Line 87: @@
 To import the presets use: "File -> Import -> Config Bundle"
-==== Super Slicer (OLD) ====
+==== Super Slicer (Depricated) ====
 [[https://github.com/supermerill/SuperSlicer|SuperSlicer]]
@@ Line 137: / Line 141: @@
   * Unscrew the nozzle gently and screw in the new one.
-  * Next go into the web interface and go to **Sidebar > Config > printer.conf**
+  * Next go into the web interface and go to **Sidebar > Config > toolhead.conf**
   * At the top please comment/uncomment the correct extruder
 For example if you want the 0.25mm extruder, it should look like this: