Differences

This shows you the differences between two versions of the page.

--- voron_2_4_r2 [2024-04-24 17:39] – jaso55555
+++ voron_2_4_r2 [2025-03-02 03:52] (current) – build volume MirZa
@@ Line 1: / Line 1: @@
 ====== Voron 2.4 r2 (300mm³) ======
-Lended to the lab by Jacob Lewis
+Lent to the lab by Jacob Lewis
+Build volume is 290mm x 290mm build plate x 260mm high
 ===== Costs =====
@@ Line 12: / Line 14: @@
 ==== PLA ====
-  * [[https://www.esun3d.com/|eSun]]
+  * [[https://www.esun3d.com/|eSun]]. ePLA matte is recommended; cheap, prints very nicely, matte finish looks wonderful.
-    * ePLA matte is recommended; cheap, prints very nicely, matte finish looks wonderful.
+  * Some of Farnell's own brand "Multicomp" appears to be made by eSun. Certainly the ePLA matte, including the iconic "Femboy pink". It is available a bit cheaper than the eSun on amazon if you order through a university account.
   * [[https://hatchbox3d.com/|Hatchbox]]
   * [[https://uk.rs-online.com/web/c/computing-peripherals/3d-printing-scanning/3d-printing-materials/|RS Pro]]
@@ Line 35: / Line 37: @@
   * [[https://www.esun3d.com/|eSun]]
-Please use the alternate bed kept to the left of the printer, although this bed cannot be run above 60 degrees or the PET coating will be damaged.
+Please use the carbon fibre bed, usually kept to the left of the printer. This bed cannot be run above 60 degrees or the PET coating will be damaged.
 ==== Other Materials ====