3dprinters
This is an old revision of the document!
Table of Contents
3D Printers
Costs
| Material | Members/funders | Non-members |
|---|---|---|
| 1.75mm PLA | £0.30/m | £4/hour |
| 3.00/2.85mm PLA | £0.50/m | £4/hour |
Working Printers
 Original Prusa MK4 | Owner: Miron Zadora Filament: 1.75 mm Location: G14 |
 Original Prusa Mini | Owner: Miron Zadora Filament: 1.75 mm Location: G14 |
 Voron 2.4r2 | Owner: Jacob Lewis Filament: 1.75 mm Location: G14 |
Hibernating Printers
Ultimaker 2
 Ultimaker 2 | Ownership: Hacklab (Bought December 2014) Filament: 3.00/2.85mm Location: G11 |
Printer Graveyard
3D RepRap
3D RepRap
Ownership: Matt Ellis
RAMPS 1.2 board, the electronics board that controls the printing process.
Location:in the store,
Status: semi-working, (worked before, was damaged, needs rewiring)
Maker Bot
Ownership: long-term loan fromdonated to the lab by Fib
Status: Currently not working, (worked before)
Extruder isn't working and the firmware on it is the wrong one. Needs loads of work.
Prusa Style
Ownership: unclear
Work in progress. Needs firmware reloaded and motor connectors put onto the cables.
Approved filaments
Be careful as our printers use different diameter filament!
Most of these can be bought on amazon.
You can also try asking on the mailing list as some members may be willing to sell some of their own.
PLA
PETG
3dprinters.1699112430.txt.gz · Last modified: 2023-11-04 15:40 by dan