Prusa i3 MK3s
Ownership: Miron Zadora
Status: Fully working.
Location: G11
Filament: 1.75 mm
Ultimaker 2
Ownership: Hacklab. Bought December 2014.
Filament: 3.00/2.85mm
Be careful as our printers use different diameter filament!
Most of these can be bought on amazon.
You can also try asking on the mailing list as some members may be willing to sell some of their own.
3D RepRap
Ownership: Matt Ellis
RAMPS 1.2 board, the electronics board that controls the printing process.
Location:in the store,
Status: semi-working, (worked before, was damaged, needs rewiring)
Ownership: long-term loan fromdonated to the lab by Fib
Status: Currently not working, (worked before)
Extruder isn't working and the firmware on it is the wrong one. Needs loads of work.
Ownership: unclear
Work in progress. Needs firmware reloaded and motor connectors put onto the cables.