3dprinters
This is an old revision of the document!
Table of Contents
3D Printers
Costs
The lab has its own labelled filament, most of it is orange. Fees for using it are below. Unlabelled filament may belong to someone and should not be used.
| Material | Members | Non-members |
|---|---|---|
| 1.75mm PLA | £0.30/m | £4/hour |
| 3.00/2.85mm PLA | £0.50/m | £4/hour |
Working Printers
 Original Prusa MK4 | Owner: Miron Zadora Filament: 1.75 mm Location: G14 |
 Original Prusa Mini | Owner: Miron Zadora Filament: 1.75 mm Location: On holiday |
 Voron 2.4r2 | Owner: Jacob Lewis Filament: 1.75 mm Location: G14 |
 Voxelab Aquila V1 | Owner: Donated to the lab by Pidge Filament: 1.75 mm Location: G14 |
 Ultimaker 2 | Ownership: Hacklab (Bought December 2014) Filament: 3.00/2.85mm Location: G14 |
Printer Graveyard
3D RepRap
3D RepRap
Ownership: Matt Ellis
RAMPS 1.2 board, the electronics board that controls the printing process.
Location:in the store,
Status: semi-working, (worked before, was damaged, needs rewiring)
Maker Bot
Ownership: long-term loan fromdonated to the lab by Fib
Status: Currently not working, (worked before)
Extruder isn't working and the firmware on it is the wrong one. Needs loads of work.
Prusa Style
Ownership: unclear
Work in progress. Needs firmware reloaded and motor connectors put onto the cables.
3dprinters.1733648732.txt.gz · Last modified: 2024-12-08 09:05 by simon