Differences

This shows you the differences between two versions of the page.

--- 3dscanner [2015-07-23 21:10] – created miek
+++ 3dscanner [2024-11-26 18:05] (current) – [Software install] simon
@@ Line 1: / Line 1: @@
 ====== 3D Scanner ======
-We have a NextEngine 3D Scanner SD.
+We have a NextEngine 3D Scanner SD. Status: working!
 ===== Software install =====
-  - Download ScanStudio CORE 1.7.3 from www.nextengine.com/start and save to computer
+Details are [[private:3dscanner|available here]] for members only.
-  - Download the Desktop 3D scanner drivers from support.nextengine.com and go to the download section and install
-  - After save is complete, right click in installer and go to Properties
+==== Log ====
-  - Then click on the Compatibility tab and check 'Run this program in compatibility mode for:" and set it to Windows XP SP3 and press OK
-  - Now right click on the installer and select 'Run as administrator'
+-11-18:
-  - Proceed to install and make sure that the 3D Scanner driver box is unchecked (if it is checked, then proceed and just ignore the errors that might pop up)
+  * Laura & Random reported that the machine seemed to be broken
-  - ScanStudio will start with errors, but just close the software after it loads up
-  - Copy the attached DLL (wdapi901.dll) to the following directories:
+-1-28:
-          * C:\Program Files(x86)\NextEngine\ScanStudio\Driver
+  * Mike opened it up and found that there is an unknown fault on the power supply board - similar to its initial fault.
-          * C:\Program Files(x86)\NextEngine\ScanStudio\DLL
-  - Run ScanStudio and plug in scanner
+-12-13:
+  * Martin has fixed the power supply fault.
-If installing on a 32-bit PC, please skip steps 7-9