Differences

This shows you the differences between two versions of the page.

--- lasercutter2 [2022-09-27 22:45] – [Resources] scottanderson
+++ lasercutter2 [2025-02-25 14:07] (current) – 2025-02-22 Guide laser is not working simon
@@ Line 12: / Line 12: @@
 See also:
-  * [[lasercutter|Laser Cutter #1]]
+  * [[lasercutter|Laser Cutter #1]], the machine located opposite Laser Cutter #2
   * [[lasercutter_tips_and_tricks|Laser cutting tips and tricks]]
   * [[lasermaterials|Laser materials price list]]
+**Save your project file on the local disk if it's complex otherwise the software will be excessively slow (because the latency of the network share slows down the compile process).**
 ===== Safety =====
@@ Line 23: / Line 25: @@
 {{:flameyboi.jpg?direct&800|}}
+===== Prices =====
+See [[lasercutter#prices]].
 ===== Recommended Settings =====
@@ Line 49: / Line 55: @@
 ^ Laminate | 1.5mm | 50 | 100 | Miron |
 | :::                | 3mm |  |  |  |
+| |||||
+^ PTFE (Teflon) | 1mm | 35 | 100 | Mike |
 | |||||
 | Card (200gsm) || 40-55 | 30 | Scott |
@@ Line 280: / Line 288: @@
   * "Having an issue with one of the axis (I believe x? The front to back one) was not working after removing the rotary (and obviously resetting the switches to normal position)" (Diarmaid)
   * "The laser is fixed, the big switch [that switches between the rotary axis and the normal axis] needs to be looked at in the future." (Costa)
+-08-09:
+  * PC PSU has failed, swapped with the Old Laser PC (including the CR2032)
+-08-15:
+  * PC replaced - was: Dell Optiplex 980 (labelled "Morrigan"), 4GB RAM, HDD; now: i5-8400T, 16GB RAM, 256GB NVMe
+-10-18:
+  * Top cover hinges modified
+-10-27:
+  * Lens is clean
+  * Mirror cleaned
+-02-22:
+  * Guide laser is not working
 {{tag>equipment}}