roof
This is an old revision of the document!
Table of Contents
Block-B Roof
Current Status
External:
- Pole attached to stairway:
- Active mini-whip antenna
- VHF yagi antenna
- APRS dipole antenna
- FlightRadar24 stick antenna on plant room roof
- HF magnetic loop antenna on plant room roof
- 50MHz stick antenna on east-end
30cm dish access point- HF Multiband Dipole
Internal (near external door):
- “sdr” PC with two RTL-SDR receivers (one with HF converter)
- “aprspi” Raspberry Pi with RTL-SDR receiver
- OptiPlex 755 PC and SDRplay receiver
- FlightRadar24 receiver unit with GPS antenna
- LoRaWAN gateway and antenna (Al)
- TL-WR703N access point
- 8-port network switch
Internal (central shelf unit):
- “switch-roof-b” 24-port network switch
Cable links:
- 2x Cat 5 network cable to G11
- 2x Coax RF cable to G1
- Various Coax to external antennas
Accessing the external roof
Summerhall must be contacted before any Hacklab activity is carried out on the roof (not including the plant room). This is to avoid causing alarm to security personnel.
Weekdays before 18:00: email the list of contacts below, before going onto the roof.
At other times: email the list of contacts below, and also speak to the reception desk or contact the duty manager or security by radio.
info@summerhall.co.uk, dm@summerhall.co.uk, antonia@summerhall.co.uk, info@edinburghhacklab.com mailto
This is the process agreed between Al and Antonia on 28th May 2018.
Other Rules:
- Don't go on the roof in bad weather.
- Don't work alone.
- Stay away from the bees, especially during warm daylight hours.
roof.1530193419.txt.gz · Last modified: 2018-06-28 13:43 by tim