This is an old revision of the document!
−Table of Contents
Network
Layer 2
Name | Model | Location |
---|---|---|
switch-g11-d | HPE A5120-48G | Top-rack |
switch-g1 | 3Com/HP A5500-48G | G1 ceiling |
switch-roof | HP Procurve 8-port | Block B roof/plant room |
switch-roof-b | HP Procurve 24-port | Block B roof/plant room |
other unmanaged edge switches |
hubs summerhall \ / \ / \ / oxygen | | | unifi-g11 -- switch-g11-d / \ \ / \ switch-roof-b -- ap-roof / \ / switch-roof / switch-g1 / | \ / | \ / | \ unmanaged-g2 | unifi-g1/g2/g8 | | [multiple in g1]
HUBS: Gigabit copper between oxygen and the HUBS router in our rack.
Summerhall: Gigabit fibre between switch-g11-d and the Summerhall server room. This was originally intended to be connected directly to oxygen, but the SFP was incorrectly configured so we are currently using a VLAN via our switch.
Layer 3
Internal IPv4 10.38.32.0/20.
Routing is handled by oxygen, a Dell PowerEdge R610 running RouterOS.
Old: HUBS
185.34.62.0/26 and 2a04:5d00:70::/48 provided by HUBS.
Router address: 185.34.62.1
External NAT address: 185.34.62.2
This service will be ceased from 1st July 2020. The IPv4 addresses will continue to be routed via a tunnel until 14th July 2020.
New: Summerhall
Router IP: 46.226.0.133/31
Gateway IP: 46.226.0.132
IPv4 (owned by Hacklab): 209.16.157.0/24
IPv6 (Fluency PA): 2a00:a600:6::/48
IPv6 (HUBS PA): 2a04:5d00:70::/48
WiFi
Hostname | Location | SSIDs |
---|---|---|
unifi-g1 | G1 (Main room) | Hacklab, spacenet |
unifi-g2 | G2 (Laser room) | Hacklab, spacenet |
unifi-g8 | G8 (Workshop) | Hacklab, spacenet |
unifi-g11 | G11 (Store room) | Hacklab, spacenet |
unifi-g14 | G14 (Electronics) | Hacklab, spacenet |
unifi-makerbee | Floor 2 (MakerBee's office) | spacenet |
ap-roof | Roof | spacenet |
See WiFi for client connection details.
Record Keeping
- NetBox - for VLANs, IPs, hardware and port connections (for some switches)
- Edinburgh Hacklab Assigned Numbers Authority (EHANA) - port connections (for some switches)
Manuals
- HP A5500 EI (3Com 4800G)